On 29/07/2023 11:12, wangweidong.a@xxxxxxxxxx wrote: > From: Weidong Wang <wangweidong.a@xxxxxxxxxx> > > Mainly includes aw88261 register table, Makefile and Kconfig. > > Signed-off-by: Weidong Wang <wangweidong.a@xxxxxxxxxx> > --- > sound/soc/codecs/Kconfig | 15 + > sound/soc/codecs/Makefile | 3 + > sound/soc/codecs/aw88261/aw88261_reg.h | 374 +++++++++++++++++++++++++ > 3 files changed, 392 insertions(+) > create mode 100644 sound/soc/codecs/aw88261/aw88261_reg.h > > diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig > index c2de4ee72183..1e3526812cc8 100644 > --- a/sound/soc/codecs/Kconfig > +++ b/sound/soc/codecs/Kconfig > @@ -55,6 +55,7 @@ config SND_SOC_ALL_CODECS > imply SND_SOC_ALC5632 > imply SND_SOC_AW8738 > imply SND_SOC_AW88395 > + imply SND_SOC_AW88261 > imply SND_SOC_BT_SCO > imply SND_SOC_BD28623 > imply SND_SOC_CHV3_CODEC > @@ -640,6 +641,20 @@ config SND_SOC_AW88395 > digital Smart K audio amplifier with an integrated 10V > smart boost convert. > > +config SND_SOC_AW88261 > + tristate "Soc Audio for awinic aw88261" > + depends on I2C > + select CRC8 > + select REGMAP_I2C > + select GPIOLIB > + select SND_SOC_AW88395_LIB > + help > + This option enables support for aw88261 Smart PA. > + The awinic AW88261 is an I2S/TDM input, high efficiency > + digital Smart K audio amplifier. The output voltage of > + boost converter can be adjusted smartly according to > + the input amplitude. > + > config SND_SOC_BD28623 > tristate "ROHM BD28623 CODEC" > help > diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile > index b48a9a323b84..9df43de213f0 100644 > --- a/sound/soc/codecs/Makefile > +++ b/sound/soc/codecs/Makefile > @@ -49,6 +49,8 @@ snd-soc-aw8738-objs := aw8738.o > snd-soc-aw88395-lib-objs := aw88395/aw88395_lib.o > snd-soc-aw88395-objs := aw88395/aw88395.o \ > aw88395/aw88395_device.o > +snd-soc-aw88261-objs := aw88261/aw88261.o \ > + aw88261/aw88261_device.o > snd-soc-bd28623-objs := bd28623.o > snd-soc-bt-sco-objs := bt-sco.o > snd-soc-chv3-codec-objs := chv3-codec.o > @@ -431,6 +433,7 @@ obj-$(CONFIG_SND_SOC_ARIZONA) += snd-soc-arizona.o > obj-$(CONFIG_SND_SOC_AW8738) += snd-soc-aw8738.o > obj-$(CONFIG_SND_SOC_AW88395_LIB) += snd-soc-aw88395-lib.o > obj-$(CONFIG_SND_SOC_AW88395) +=snd-soc-aw88395.o > +obj-$(CONFIG_SND_SOC_AW88261) +=snd-soc-aw88261.o > obj-$(CONFIG_SND_SOC_BD28623) += snd-soc-bd28623.o > obj-$(CONFIG_SND_SOC_BT_SCO) += snd-soc-bt-sco.o > obj-$(CONFIG_SND_SOC_CHV3_CODEC) += snd-soc-chv3-codec.o > diff --git a/sound/soc/codecs/aw88261/aw88261_reg.h b/sound/soc/codecs/aw88261/aw88261_reg.h > new file mode 100644 > index 000000000000..7ef128a3e6ee > --- /dev/null > +++ b/sound/soc/codecs/aw88261/aw88261_reg.h > @@ -0,0 +1,374 @@ > +// SPDX-License-Identifier: GPL-2.0-only If you add the headers now, it means they are not used in any previous patches. Therefore drop the header - it is useless. Best regards, Krzysztof
