Re: [PATCH 05/10] dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/05/2023 14:28, Charles Keepax wrote:
> The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
> (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
> for portable applications. It provides a high dynamic range, stereo
> DAC for headphone output, two integrated Class D amplifiers for
> loudspeakers, and two ADCs for wired headset microphone input or
> stereo line input. PDM inputs are provided for digital microphones.
> 
> Add a YAML DT binding document for this device.
> 
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
> ---
>  .../bindings/mfd/cirrus,cs42l43.yaml          | 212 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 213 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml
> new file mode 100644
> index 0000000000000..e1fd70e0a3467
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/cirrus,cs42l43.yaml
> @@ -0,0 +1,212 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/cirrus,cs42l43.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cirrus Logic CS42L43 Audio CODEC

That's audio codec, so it should be in sound, not MFD.

> +
> +maintainers:
> +  - patches@xxxxxxxxxxxxxxxxxxxxx
> +
> +description: |
> +  The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
> +  (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
> +  for portable applications. It provides a high dynamic range, stereo
> +  DAC for headphone output, two integrated Class D amplifiers for
> +  loudspeakers, and two ADCs for wired headset microphone input or
> +  stereo line input. PDM inputs are provided for digital microphones.
> +
> +required:
> +  - compatible
> +  - reg
> +  - VDD_P-supply
> +  - VDD_A-supply
> +  - VDD_D-supply
> +  - VDD_IO-supply
> +  - VDD_CP-supply

lowercase, no underscores in all property names.

> +
> +additionalProperties: false

This order is quite unexpected... please do not invent your own layout.
Use example-schema as your starting point. I suspect there will be many
things to fix, so limited review follows (not complete).


Missing ref to dai-common

> +
> +properties:
> +  compatible:
> +    enum:
> +      - cirrus,cs42l43
> +
> +  reg:
> +    maxItems: 1
> +
> +  VDD_P-supply:
> +    description:
> +      Power supply for the high voltage interface.
> +
> +  VDD_A-supply:
> +    description:
> +      Power supply for internal analog circuits.
> +
> +  VDD_D-supply:
> +    description:
> +      Power supply for internal digital circuits.
> +
> +  VDD_IO-supply:
> +    description:
> +      Power supply for external interface and internal digital logic.
> +
> +  VDD_CP-supply:
> +    description:
> +      Power supply for the amplifier 3 and 4 charge pump.
> +
> +  VDD_AMP-supply:
> +    description:
> +      Power supply for amplifier 1 and 2.
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +
> +  gpio-ranges:
> +    items:
> +      - description: A phandle to the CODEC pinctrl node
> +        minimum: 0
> +      - const: 0
> +      - const: 0
> +      - const: 3
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 2
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +  clocks:
> +    items:
> +      - description: Synchronous audio clock provided on mclk_in.
> +
> +  clock-names:
> +    const: mclk
> +
> +  pinctrl:
> +    type: object

additionalProperties: false

> +
> +    allOf:
> +      - $ref: "../pinctrl/pinctrl.yaml#"

No quotes, absolute path, so /schemas/pinctrl/....

> +
> +    properties:
> +      pin-settings:

What's this node about? pinctrl/pinctrl/pins? One level too much.

> +        type: object
> +
> +        additionalProperties: false
> +
> +        patternProperties:
> +          '-pins$':
> +            type: object
> +
> +            allOf:
> +              - $ref: "../pinctrl/pincfg-node.yaml#"
> +              - $ref: "../pinctrl/pinmux-node.yaml#"

Same comments.

> +
> +            oneOf:
> +              - required: [ groups ]
> +              - required: [ pins ]
> +
> +            unevaluatedProperties: false
> +
> +            properties:
> +              groups:
> +                enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ]
> +
> +              pins:
> +                enum: [ gpio1, gpio2, gpio3,
> +                        asp_dout, asp_fsync, asp_bclk,
> +                        pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data,
> +                        i2c_sda, i2c_scl,
> +                        spi_miso, spi_sck, spi_ssb ]
> +
> +              function:
> +                enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ]
> +
> +              drive-strength:
> +                description: Set drive strength in mA
> +                enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ]
> +
> +              input-debounce:
> +                description: Set input debounce in uS
> +                enum: [ 0, 85 ]
> +
> +  spi:
> +    type: object
> +
> +    allOf:
> +      - $ref: "../spi/spi-controller.yaml#"

Same comments.
> +
> +    unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    i2c@e0004000 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        reg = <0xe0004000 0x1000>;

Drop, just i2c

> +
> +        cs42l43: codec@1a {
> +            compatible = "cirrus,cs42l43";
> +            reg = <0x1a>;
> +
> +            VDD_P-supply = <&vdd5v0>;
> +            VDD_D-supply = <&vdd1v8>;
> +            VDD_A-supply = <&vdd1v8>;
> +            VDD_IO-supply = <&vdd1v8>;
> +            VDD_CP-supply = <&vdd1v8>;
> +            VDD_AMP-supply = <&vdd5v0>;
> +
> +            reset-gpios = <&gpio 0>;

Use proper defines for flags.


Best regards,
Krzysztof




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux