Hi Morimoto-san,
On 28/03/2023 02:20, Kuninori Morimoto wrote:
>
> Hi Peter
>
> Thank you for your feedback.
>
>>> @@ -1694,11 +1694,9 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
>>>
>>> link->cpus = &dlc[0];
>>> link->codecs = &dlc[1];
>>> - link->platforms = &dlc[2];
>>>
>>> link->num_cpus = 1;
>>> link->num_codecs = 1;
>>> - link->num_platforms = 1;
>>>
>>> link->dobj.index = tplg->index;
>>> link->dobj.type = SND_SOC_DOBJ_DAI_LINK;
>>> @@ -1726,8 +1724,6 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
>>> link->codecs->name = "snd-soc-dummy";
>>> link->codecs->dai_name = "snd-soc-dummy-dai";
>>>
>>> - link->platforms->name = "snd-soc-dummy";
>>> -
>>
>> I think this patch is incorrect and should be reverted (I have received
>> a note from a SOF developer).
>> The link->cpus->dai_name is not necessarily "snd-soc-dummy", it is set
>> earlier:
>> if (strlen(pcm->dai_name)) {
>> link->cpus->dai_name = devm_kstrdup(tplg->dev, pcm->dai_name,
>> GFP_KERNEL);
>> if (!link->cpus->dai_name) {
>> ret = -ENOMEM;
>> goto err;
>> }
>> }
>>
>> We cannot be sure that it is the same component, in fact it is most like
>> not.
>
> But sorry, I don't understand the point.
> This patch removed dummy PLATFORM which is not necessary I think,
> but you are talking about CPU.
The patch removes the dummy platform with a justification that if the
CPU name and the platform name is identical, then the platform name does
not need to be set.
But in this case the CPU name and the platform name is _not_ identical,
they are different and we need to have the dummy platform on the FE side
unconditionally.
> Could you please explain more detail what is the problem ?
snd_sof:sof_dai_load: sof-audio-pci-intel-tgl 0000:00:1f.3: tplg: load
pcm HDMI1
sof-audio-pci-intel-tgl 0000:00:1f.3: error: no platforms
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: FE link loading failed
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: topology: could not load
header: -22
sof-audio-pci-intel-tgl 0000:00:1f.3: error: tplg component load failed -22
sof-audio-pci-intel-tgl 0000:00:1f.3: error: failed to load DSP topology -22
sof-audio-pci-intel-tgl 0000:00:1f.3: ASoC: error at
snd_soc_component_probe on 0000:00:1f.3: -22
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: failed to instantiate
card -22
skl_hda_dsp_generic: probe of skl_hda_dsp_generic failed with error -22
which should look like this ideally:
snd_sof:sof_dai_load: sof-audio-pci-intel-tgl 0000:00:1f.3: tplg: load
pcm HDMI1
snd_sof:sof_dai_load: sof-audio-pci-intel-tgl 0000:00:1f.3: tplg: load
pcm HDMI2
snd_sof:sof_dai_load: sof-audio-pci-intel-tgl 0000:00:1f.3: tplg: load
pcm HDMI3
snd_sof:sof_dai_load: sof-audio-pci-intel-tgl 0000:00:1f.3: tplg: load
pcm HDA Analog
snd_sof:sof_dai_load: sof-audio-pci-intel-tgl 0000:00:1f.3: tplg: load
pcm DeepBuffer
>
>
> Thank you for your help !!
>
> Best regards
> ---
> Kuninori Morimoto
--
Péter
