In case of regressions for any users that the new pdm_gain value is too high and for additional debugging, introduce a module parameter that would let them configure it. Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx> --- sound/soc/amd/yc/acp6x-pdm-dma.c | 7 ++++++- sound/soc/amd/yc/acp6x.h | 2 +- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/sound/soc/amd/yc/acp6x-pdm-dma.c b/sound/soc/amd/yc/acp6x-pdm-dma.c index acecd6a4ec4b1..3d6a765c5011c 100644 --- a/sound/soc/amd/yc/acp6x-pdm-dma.c +++ b/sound/soc/amd/yc/acp6x-pdm-dma.c @@ -7,6 +7,7 @@ #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/bitfield.h> #include <linux/err.h> #include <linux/io.h> #include <sound/pcm_params.h> @@ -18,6 +19,10 @@ #define DRV_NAME "acp_yc_pdm_dma" +static int pdm_gain = 3; +module_param(pdm_gain, int, 0644); +MODULE_PARM_DESC(pdm_gain, "Gain control (0-3)"); + static const struct snd_pcm_hardware acp6x_pdm_hardware_capture = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | @@ -55,7 +60,7 @@ static void acp6x_enable_pdm_clock(void __iomem *acp_base) acp6x_writel(pdm_clk_enable, acp_base + ACP_WOV_CLK_CTRL); pdm_ctrl = acp6x_readl(acp_base + ACP_WOV_MISC_CTRL); - pdm_ctrl |= ACP_WOV_MISC_CTRL_MASK; + pdm_ctrl |= FIELD_PREP(ACP_WOV_GAIN_CONTROL, pdm_gain); acp6x_writel(pdm_ctrl, acp_base + ACP_WOV_MISC_CTRL); } diff --git a/sound/soc/amd/yc/acp6x.h b/sound/soc/amd/yc/acp6x.h index 846ca10e24d3f..036207568c048 100644 --- a/sound/soc/amd/yc/acp6x.h +++ b/sound/soc/amd/yc/acp6x.h @@ -31,7 +31,7 @@ #define ACP_ERROR_STAT 29 #define PDM_DECIMATION_FACTOR 2 #define ACP_PDM_CLK_FREQ_MASK 7 -#define ACP_WOV_MISC_CTRL_MASK 0x18 +#define ACP_WOV_GAIN_CONTROL GENMASK(4, 3) #define ACP_PDM_ENABLE 1 #define ACP_PDM_DISABLE 0 #define ACP_PDM_DMA_EN_STATUS 2 -- 2.34.1