In case of regressions for any users that the new pdm_gain value is too high and for additional debugging, introduce a module parameter that would let them configure it. Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx> --- sound/soc/amd/renoir/acp3x-pdm-dma.c | 7 ++++++- sound/soc/amd/renoir/rn_acp3x.h | 2 +- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/sound/soc/amd/renoir/acp3x-pdm-dma.c b/sound/soc/amd/renoir/acp3x-pdm-dma.c index 7203c6488df0e..74b70bc4b52fd 100644 --- a/sound/soc/amd/renoir/acp3x-pdm-dma.c +++ b/sound/soc/amd/renoir/acp3x-pdm-dma.c @@ -6,6 +6,7 @@ #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/bitfield.h> #include <linux/err.h> #include <linux/io.h> #include <linux/pm_runtime.h> @@ -17,6 +18,10 @@ #define DRV_NAME "acp_rn_pdm_dma" +static int pdm_gain = 3; +module_param(pdm_gain, int, 0644); +MODULE_PARM_DESC(pdm_gain, "Gain control (0-3)"); + static const struct snd_pcm_hardware acp_pdm_hardware_capture = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | @@ -80,7 +85,7 @@ static void enable_pdm_clock(void __iomem *acp_base) rn_writel(pdm_clk_enable, acp_base + ACP_WOV_CLK_CTRL); pdm_ctrl = rn_readl(acp_base + ACP_WOV_MISC_CTRL); - pdm_ctrl |= ACP_WOV_MISC_CTRL_MASK; + pdm_ctrl |= FIELD_PREP(ACP_WOV_GAIN_CONTROL, pdm_gain); rn_writel(pdm_ctrl, acp_base + ACP_WOV_MISC_CTRL); } diff --git a/sound/soc/amd/renoir/rn_acp3x.h b/sound/soc/amd/renoir/rn_acp3x.h index c174f84650d24..7d0f4e6a2834d 100644 --- a/sound/soc/amd/renoir/rn_acp3x.h +++ b/sound/soc/amd/renoir/rn_acp3x.h @@ -34,7 +34,7 @@ #define ACP_ERROR_STAT 29 #define PDM_DECIMATION_FACTOR 0x2 #define ACP_PDM_CLK_FREQ_MASK 0x07 -#define ACP_WOV_MISC_CTRL_MASK 0x18 +#define ACP_WOV_GAIN_CONTROL GENMASK(4, 3) #define ACP_PDM_ENABLE 0x01 #define ACP_PDM_DISABLE 0x00 #define ACP_PDM_DMA_EN_STATUS 0x02 -- 2.34.1