Older Qualcomm platforms like APQ8016 do not have hardware support for SoundWire, so kernel configurations made specifically for those platforms will usually not have CONFIG_SOUNDWIRE enabled. Unfortunately commit 8d89cf6ff229 ("ASoC: qcom: cleanup and fix dependency of QCOM_COMMON") breaks those kernel configurations, because SOUNDWIRE is now a required dependency for SND_SOC_QCOM_COMMON (and in turn also SND_SOC_APQ8016_SBC). Trying to migrate such a kernel config silently disables SND_SOC_APQ8016_SBC and breaks audio functionality. The soundwire helpers in common.c are only used by two of the Qualcomm audio machine drivers, so building and requiring CONFIG_SOUNDWIRE for all platforms is unnecessary. There is no need to stuff all common code into a single module. Fix the issue by moving the soundwire helpers to a separate SND_SOC_QCOM_SDW module/option that is selected only by the machine drivers that make use of them. This also allows reverting the imply/depends changes from the previous fix because both SM8250 and SC8280XP already depend on SOUNDWIRE, so the soundwire helpers will be only built if SOUNDWIRE is really enabled. Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> Fixes: 8d89cf6ff229 ("ASoC: qcom: cleanup and fix dependency of QCOM_COMMON") Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx> --- sound/soc/qcom/Kconfig | 21 ++++--- sound/soc/qcom/Makefile | 2 + sound/soc/qcom/common.c | 114 ----------------------------------- sound/soc/qcom/common.h | 10 ---- sound/soc/qcom/sc8280xp.c | 1 + sound/soc/qcom/sdw.c | 123 ++++++++++++++++++++++++++++++++++++++ sound/soc/qcom/sdw.h | 18 ++++++ sound/soc/qcom/sm8250.c | 1 + 8 files changed, 157 insertions(+), 133 deletions(-) create mode 100644 sound/soc/qcom/sdw.c create mode 100644 sound/soc/qcom/sdw.h diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 96a6d4731e6f..e7b00d1d9e99 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -2,7 +2,6 @@ menuconfig SND_SOC_QCOM tristate "ASoC support for QCOM platforms" depends on ARCH_QCOM || COMPILE_TEST - imply SND_SOC_QCOM_COMMON help Say Y or M if you want to add support to use audio devices in Qualcomm Technologies SOC-based platforms. @@ -60,14 +59,16 @@ config SND_SOC_STORM config SND_SOC_APQ8016_SBC tristate "SoC Audio support for APQ8016 SBC platforms" select SND_SOC_LPASS_APQ8016 - depends on SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_COMMON help Support for Qualcomm Technologies LPASS audio block in APQ8016 SOC-based systems. Say Y if you want to use audio devices on MI2S. config SND_SOC_QCOM_COMMON - depends on SOUNDWIRE + tristate + +config SND_SOC_QCOM_SDW tristate config SND_SOC_QDSP6_COMMON @@ -144,7 +145,7 @@ config SND_SOC_MSM8996 depends on QCOM_APR depends on COMMON_CLK select SND_SOC_QDSP6 - depends on SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_COMMON help Support for Qualcomm Technologies LPASS audio block in APQ8096 SoC-based systems. @@ -155,7 +156,7 @@ config SND_SOC_SDM845 depends on QCOM_APR && I2C && SOUNDWIRE depends on COMMON_CLK select SND_SOC_QDSP6 - depends on SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_COMMON select SND_SOC_RT5663 select SND_SOC_MAX98927 imply SND_SOC_CROS_EC_CODEC @@ -169,7 +170,8 @@ config SND_SOC_SM8250 depends on QCOM_APR && SOUNDWIRE depends on COMMON_CLK select SND_SOC_QDSP6 - depends on SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_SDW help To add support for audio on Qualcomm Technologies Inc. SM8250 SoC-based systems. @@ -180,7 +182,8 @@ config SND_SOC_SC8280XP depends on QCOM_APR && SOUNDWIRE depends on COMMON_CLK select SND_SOC_QDSP6 - depends on SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_SDW help To add support for audio on Qualcomm Technologies Inc. SC8280XP SoC-based systems. @@ -190,7 +193,7 @@ config SND_SOC_SC7180 tristate "SoC Machine driver for SC7180 boards" depends on I2C && GPIOLIB depends on SOUNDWIRE || SOUNDWIRE=n - depends on SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_COMMON select SND_SOC_LPASS_SC7180 select SND_SOC_MAX98357A select SND_SOC_RT5682_I2C @@ -204,7 +207,7 @@ config SND_SOC_SC7180 config SND_SOC_SC7280 tristate "SoC Machine driver for SC7280 boards" depends on I2C && SOUNDWIRE - depends on SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_COMMON select SND_SOC_LPASS_SC7280 select SND_SOC_MAX98357A select SND_SOC_WCD938X_SDW diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile index 8b97172cf990..254350d9dc06 100644 --- a/sound/soc/qcom/Makefile +++ b/sound/soc/qcom/Makefile @@ -28,6 +28,7 @@ snd-soc-sdm845-objs := sdm845.o snd-soc-sm8250-objs := sm8250.o snd-soc-sc8280xp-objs := sc8280xp.o snd-soc-qcom-common-objs := common.o +snd-soc-qcom-sdw-objs := sdw.o obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o @@ -38,6 +39,7 @@ obj-$(CONFIG_SND_SOC_SC8280XP) += snd-soc-sc8280xp.o obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o +obj-$(CONFIG_SND_SOC_QCOM_SDW) += snd-soc-qcom-sdw.o #DSP lib obj-$(CONFIG_SND_SOC_QDSP6) += qdsp6/ diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c index 49c74c1662a3..96fe80241fb4 100644 --- a/sound/soc/qcom/common.c +++ b/sound/soc/qcom/common.c @@ -180,120 +180,6 @@ int qcom_snd_parse_of(struct snd_soc_card *card) } EXPORT_SYMBOL_GPL(qcom_snd_parse_of); -int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream, - struct sdw_stream_runtime *sruntime, - bool *stream_prepared) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); - int ret; - - if (!sruntime) - return 0; - - switch (cpu_dai->id) { - case WSA_CODEC_DMA_RX_0: - case WSA_CODEC_DMA_RX_1: - case RX_CODEC_DMA_RX_0: - case RX_CODEC_DMA_RX_1: - case TX_CODEC_DMA_TX_0: - case TX_CODEC_DMA_TX_1: - case TX_CODEC_DMA_TX_2: - case TX_CODEC_DMA_TX_3: - break; - default: - return 0; - } - - if (*stream_prepared) { - sdw_disable_stream(sruntime); - sdw_deprepare_stream(sruntime); - *stream_prepared = false; - } - - ret = sdw_prepare_stream(sruntime); - if (ret) - return ret; - - /** - * NOTE: there is a strict hw requirement about the ordering of port - * enables and actual WSA881x PA enable. PA enable should only happen - * after soundwire ports are enabled if not DC on the line is - * accumulated resulting in Click/Pop Noise - * PA enable/mute are handled as part of codec DAPM and digital mute. - */ - - ret = sdw_enable_stream(sruntime); - if (ret) { - sdw_deprepare_stream(sruntime); - return ret; - } - *stream_prepared = true; - - return ret; -} -EXPORT_SYMBOL_GPL(qcom_snd_sdw_prepare); - -int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct sdw_stream_runtime **psruntime) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai; - struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); - struct sdw_stream_runtime *sruntime; - int i; - - switch (cpu_dai->id) { - case WSA_CODEC_DMA_RX_0: - case RX_CODEC_DMA_RX_0: - case RX_CODEC_DMA_RX_1: - case TX_CODEC_DMA_TX_0: - case TX_CODEC_DMA_TX_1: - case TX_CODEC_DMA_TX_2: - case TX_CODEC_DMA_TX_3: - for_each_rtd_codec_dais(rtd, i, codec_dai) { - sruntime = snd_soc_dai_get_stream(codec_dai, substream->stream); - if (sruntime != ERR_PTR(-ENOTSUPP)) - *psruntime = sruntime; - } - break; - } - - return 0; - -} -EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_params); - -int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream, - struct sdw_stream_runtime *sruntime, bool *stream_prepared) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); - - switch (cpu_dai->id) { - case WSA_CODEC_DMA_RX_0: - case WSA_CODEC_DMA_RX_1: - case RX_CODEC_DMA_RX_0: - case RX_CODEC_DMA_RX_1: - case TX_CODEC_DMA_TX_0: - case TX_CODEC_DMA_TX_1: - case TX_CODEC_DMA_TX_2: - case TX_CODEC_DMA_TX_3: - if (sruntime && *stream_prepared) { - sdw_disable_stream(sruntime); - sdw_deprepare_stream(sruntime); - *stream_prepared = false; - } - break; - default: - break; - } - - return 0; -} -EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_free); - int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd, struct snd_soc_jack *jack, bool *jack_setup) { diff --git a/sound/soc/qcom/common.h b/sound/soc/qcom/common.h index 3ef5bb6d12df..d7f80ee5ae26 100644 --- a/sound/soc/qcom/common.h +++ b/sound/soc/qcom/common.h @@ -5,19 +5,9 @@ #define __QCOM_SND_COMMON_H__ #include <sound/soc.h> -#include <linux/soundwire/sdw.h> int qcom_snd_parse_of(struct snd_soc_card *card); int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd, struct snd_soc_jack *jack, bool *jack_setup); -int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream, - struct sdw_stream_runtime *runtime, - bool *stream_prepared); -int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct sdw_stream_runtime **psruntime); -int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream, - struct sdw_stream_runtime *sruntime, - bool *stream_prepared); #endif diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c index ade44ad7c585..14d9fea33d16 100644 --- a/sound/soc/qcom/sc8280xp.c +++ b/sound/soc/qcom/sc8280xp.c @@ -12,6 +12,7 @@ #include <linux/input-event-codes.h> #include "qdsp6/q6afe.h" #include "common.h" +#include "sdw.h" #define DRIVER_NAME "sc8280xp" diff --git a/sound/soc/qcom/sdw.c b/sound/soc/qcom/sdw.c new file mode 100644 index 000000000000..10249519a39e --- /dev/null +++ b/sound/soc/qcom/sdw.c @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited. +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include <linux/module.h> +#include <sound/soc.h> +#include "qdsp6/q6afe.h" +#include "sdw.h" + +int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream, + struct sdw_stream_runtime *sruntime, + bool *stream_prepared) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + int ret; + + if (!sruntime) + return 0; + + switch (cpu_dai->id) { + case WSA_CODEC_DMA_RX_0: + case WSA_CODEC_DMA_RX_1: + case RX_CODEC_DMA_RX_0: + case RX_CODEC_DMA_RX_1: + case TX_CODEC_DMA_TX_0: + case TX_CODEC_DMA_TX_1: + case TX_CODEC_DMA_TX_2: + case TX_CODEC_DMA_TX_3: + break; + default: + return 0; + } + + if (*stream_prepared) { + sdw_disable_stream(sruntime); + sdw_deprepare_stream(sruntime); + *stream_prepared = false; + } + + ret = sdw_prepare_stream(sruntime); + if (ret) + return ret; + + /** + * NOTE: there is a strict hw requirement about the ordering of port + * enables and actual WSA881x PA enable. PA enable should only happen + * after soundwire ports are enabled if not DC on the line is + * accumulated resulting in Click/Pop Noise + * PA enable/mute are handled as part of codec DAPM and digital mute. + */ + + ret = sdw_enable_stream(sruntime); + if (ret) { + sdw_deprepare_stream(sruntime); + return ret; + } + *stream_prepared = true; + + return ret; +} +EXPORT_SYMBOL_GPL(qcom_snd_sdw_prepare); + +int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct sdw_stream_runtime **psruntime) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai; + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct sdw_stream_runtime *sruntime; + int i; + + switch (cpu_dai->id) { + case WSA_CODEC_DMA_RX_0: + case RX_CODEC_DMA_RX_0: + case RX_CODEC_DMA_RX_1: + case TX_CODEC_DMA_TX_0: + case TX_CODEC_DMA_TX_1: + case TX_CODEC_DMA_TX_2: + case TX_CODEC_DMA_TX_3: + for_each_rtd_codec_dais(rtd, i, codec_dai) { + sruntime = snd_soc_dai_get_stream(codec_dai, substream->stream); + if (sruntime != ERR_PTR(-ENOTSUPP)) + *psruntime = sruntime; + } + break; + } + + return 0; + +} +EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_params); + +int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream, + struct sdw_stream_runtime *sruntime, bool *stream_prepared) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + + switch (cpu_dai->id) { + case WSA_CODEC_DMA_RX_0: + case WSA_CODEC_DMA_RX_1: + case RX_CODEC_DMA_RX_0: + case RX_CODEC_DMA_RX_1: + case TX_CODEC_DMA_TX_0: + case TX_CODEC_DMA_TX_1: + case TX_CODEC_DMA_TX_2: + case TX_CODEC_DMA_TX_3: + if (sruntime && *stream_prepared) { + sdw_disable_stream(sruntime); + sdw_deprepare_stream(sruntime); + *stream_prepared = false; + } + break; + default: + break; + } + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_free); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/qcom/sdw.h b/sound/soc/qcom/sdw.h new file mode 100644 index 000000000000..d74cbb84da13 --- /dev/null +++ b/sound/soc/qcom/sdw.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#ifndef __QCOM_SND_SDW_H__ +#define __QCOM_SND_SDW_H__ + +#include <linux/soundwire/sdw.h> + +int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream, + struct sdw_stream_runtime *runtime, + bool *stream_prepared); +int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct sdw_stream_runtime **psruntime); +int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream, + struct sdw_stream_runtime *sruntime, + bool *stream_prepared); +#endif diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c index 8dbe9ef41b1c..9626a9ef78c2 100644 --- a/sound/soc/qcom/sm8250.c +++ b/sound/soc/qcom/sm8250.c @@ -12,6 +12,7 @@ #include <linux/input-event-codes.h> #include "qdsp6/q6afe.h" #include "common.h" +#include "sdw.h" #define DRIVER_NAME "sm8250" #define MI2S_BCLK_RATE 1536000 -- 2.39.0