1.remove unused item in DT 2.revise the format
Signed-off-by: Raphael-Xu <13691752556@xxxxxxx>
---
.../devicetree/bindings/sound/tas2780.yaml | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/tas2780.yaml b/Documentation/devicetree/bindings/sound/tas2780.yaml
index 5a0de0995066..21389a16fdb9 100644
--- a/Documentation/devicetree/bindings/sound/tas2780.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2780.yaml
@@ -22,24 +22,29 @@ properties:
- ti,tas2780
reg:
- maxItems: 1
- description: |
- I2C address of the device can be between 0x38 to 0x45.
+ description:
+ I2C address of the device can be between 0x38 to 0x3f.
+ minimum: 0x38
+ maximum: 0x3f
reset-gpios:
- maxItems: 1
description: GPIO used to reset the device.
+ maxItems: 1
interrupts:
maxItems: 1
ti,imon-slot-no:
- $ref: /schemas/types.yaml#/definitions/uint32
description: TDM TX current sense time slot.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
ti,vmon-slot-no:
- $ref: /schemas/types.yaml#/definitions/uint32
description: TDM TX voltage sense time slot.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
'#sound-dai-cells':
const: 1
@@ -60,10 +65,8 @@ examples:
compatible = "ti,tas2780";
reg = <0x38>;
#sound-dai-cells = <1>;
- interrupt-parent = <&gpio1>;
interrupts = <14>;
reset-gpios = <&gpio1 15 0>;
- shutdown-gpios = <&gpio1 15 0>;
ti,imon-slot-no = <0>;
ti,vmon-slot-no = <2>;
};
--
2.35.1
