Re: [PATCH] ALSA: hda: Skip creating captures in SOF context

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 19, 2022 at 11:41 PM Jaroslav Kysela <perex@xxxxxxxx> wrote:
>
> Dne 19. 07. 22 v 16:47 Kai-Heng Feng napsal(a):
> > On HP laptops that use SOF driver for DMIC, the micmute LED doesn't
> > light up when mic is muted after commit 9b014266ef8a ("ASoC: SOF:
> > topology: use new sound control LED layer").
> >
> > The micmute LED itself is still working via sysfs, but it doesn't follow
> > mute anymore. That's because unlike vendors like Dell and Lenovo, HP
> > laptops use HDA codec to control mute LEDs instead of ACPI. So on HP
> > laptops, both SOF and HDA create captures with
> > SNDRV_CTL_ELEM_ACCESS_MIC_LED access, snd_ctl_led_set_state() considers
> > there are two different kcontrols and one of them is not muted.
>
> It does not mean that it's a wrong behavior. When both controls are muted, the
> LED should be turned on. It just requires that all inputs are off (and it may
> be the default - probably we can set in UCM or so). If you turn the "Capture
> Switch" off in amixer / alsamixer, do things work as expected ?

Yes. When all captures are muted the micmute LED is on.

>
> > So skip creating captures for HDA when it's called from SOF, the
> > captures are already handled by SOF.
>
> The capture controls are for other inputs like external analog microphone. If
> it is required to suppress the MIC LED for some hardware, just skip the
> "spec->mic_mute_led = 1" assignment in hda_generic.c . Also, the check
> "codec->core.type != HDA_DEV_ASOC" is not sufficient, because you don't know,
> if the topology really sets the MIC LED flag.

AFAIK the external analog microphone on DMIC laptop is driven by SOF driver too.
If those capture controls are indeed needed for external analog mics,
use UCM to mute them by default won't work either.

Skip "mic_mute_led = 1" can be hard because it's still needed for legacy HDA.
If checking "HDA_DEV_ASOC" isn't sufficient, is it possible to just
check "card" in snd_ctl_led_set_state(), instead of kcontrols?
I think it's reasonable to assume a card has just one speaker LED and
one microphone LED.

Kai-Heng

>
>                                         Jaroslav
>
> --
> Jaroslav Kysela <perex@xxxxxxxx>
> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux