Re: [PATCH v3 2/2] ASoC: qcom: soundwire: Add software clock gating requirement check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6/9/2022 12:59 AM, Stephen Boyd wrote:
Thanks for Your time Stephen!!!
Quoting Srinivasa Rao Mandadapu (2022-06-08 07:02:09)
Validate software clock gating required or not and do software
clock gating on hclk if soundwire is operational and keep it
running by adding flag in private dat structure.
This is to avoid conflict between older architectures,
where software clock gating is not required and on latest
architectues, where software clock gating is mandatory.
This talks about software clock gating but the code is getting a reset
and asserting it. Is that because the power on reset value of the clock
gating is to have hardware clock gating disabled, but some earlier code
is enabling hardware clock gating?

Yes Stephen. By Default this resets to HW controlled. As such there is no specific code

for enabling hardware clock gating, as these CGCR registers default setting is HW control.


Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
  drivers/soundwire/qcom.c | 27 ++++++++++++++++++++-------
  1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 38c3bf5..ebd7479 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -659,7 +665,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
         val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index);
         val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index);

-       reset_control_reset(ctrl->audio_cgcr);
+       if (ctrl->audio_cgcr)
+               reset_control_reset(ctrl->audio_cgcr);

         ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val);

@@ -1494,7 +1506,8 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev)
                 qcom_swrm_get_device_status(ctrl);
                 sdw_handle_slave_status(&ctrl->bus, ctrl->status);
         } else {
-               reset_control_reset(ctrl->audio_cgcr);
+               if (ctrl->audio_cgcr)
+                       reset_control_reset(ctrl->audio_cgcr);
reset_control_reset() is a no-op if the pointer is NULL so the if
condition is not necessary in the above two statements.
Okay. revert this NULL check here.



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux