At Thu, 15 May 2008 03:26:00 +0200, Xavi de Blas wrote: > > Hello, we have been talking on this thread: > > http://mailman.alsa-project.org/pipermail/alsa-devel/2007-July/001939.html > > because i had a problem with my hda that Takashi said it's really > specific to my hardware: > > http://mailman.alsa-project.org/pipermail/alsa-devel/2007-July/001963.html > > Now with kernel 2.6.24-16 and alsa 1.0.16, i have no audio again: > > i tried now using the patch Tobin made: > > http://mailman.alsa-project.org/pipermail/alsa-devel/2007-July/001934.html > > and it' doesn't work. In fact, i haven't used the patch, i only added the line: > > { .id = 0x51d41981, .name = "AD1981", .patch = patch_ad1981 }, > after the line: > { .id = 0x11d41981, .name = "AD1981", .patch = patch_ad1981 }, > > on: /usr/local/src/alsa-driver-1.0.16/alsa-kernel/pci/hda/patch_analog.c > > ./configure, make, sudo make install > > on reboot, the error is the same as before: > > dmesg|grep alsa > [ 41.284537] ALSA > /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/hda/hda_codec.c:230: > hda_codec: invalid dep_range_val 53:1a This means that the codec information is fairly broken. The driver should work still. It just ignores the broken entries. As this doesn't happen (the first time I got this kind of problem from the good working codec support), I suspect the hardware problem.. Takashi > > here is my /proc/asound/card0/codec#0 > > http://pastebin.ca/1018596 > > Thanks a lot > > > 2007/7/9 Xavi de Blas <xaviblas@xxxxxxxxx>: > > It worked!!! > > > > Thanks a lot > > > > I thought my hardware was broken! > > > > 2007/7/9, Tobin Davis <tdavis@xxxxxxxxxxxx>: > >> > >> Patch needs to be applied as follows: > >> > >> cd alsa-driver-1.0.14/alsa-kernel > >> patch -p1 < LenovoX60S.patch > >> cd .. > >> > >> Then you can rerun configure && make && make install. > >> > >> Tobin > >> > >> On Mon, 2007-07-09 at 17:25 +0200, Xavi de Blas wrote: > >> > >> 2007/7/9, Tobin Davis <tdavis@xxxxxxxxxxxx>: > >> > Sorry for missing this thread. I just woke up. > >> > > >> > I looked at your first pastebin output, and the actual audio codec shows > >> > up as 0x51d41981, when it should be 0x11d41981. This is why the Analog > >> > driver patch isn't detecting it. > >> > > >> > Can you try this patch against alsa-driver-1.0.14? It should detect > >> > this codec. Still not sure why it is misconfigured, unless there is a > >> > bios issue. > >> > > >> > >> I'm afraid, probably when i tried the Linuxant codecs for the modem it > >> broke the > >> bios. Not sure, but sound worked, and continued working some reboots > >> later. But when i tried a few things with wine and rebooted, sound > >> never worked again > >> > >> When i aply the patch (probably i don't do it good) there are problems: > >> > >> > >> xavier@corall:/usr/local/src/alsa-src/alsa-driver-1.0.14$ cat > >> LenovoX60S.patch | patch -p1 > >> patching file pci/hda/patch_analog.c > >> Hunk #1 FAILED at 3402. > >> 1 out of 1 hunk FAILED -- saving rejects to file > >> pci/hda/patch_analog.c.rej > >> > >> > >> xavier@corall:/usr/local/src/alsa-src/alsa-driver-1.0.14/pci/hda$ cat > >> patch_analog.c.rej > >> *************** struct hda_codec_preset snd_hda_preset_a > >> *** 3402,3407 **** > >> { .id = 0x11d41882, .name = "AD1882", .patch = patch_ad1882 }, > >> { .id = 0x11d41884, .name = "AD1884", .patch = patch_ad1884 }, > >> { .id = 0x11d41981, .name = "AD1981", .patch = patch_ad1981 }, > >> { .id = 0x11d41983, .name = "AD1983", .patch = patch_ad1983 }, > >> { .id = 0x11d41984, .name = "AD1984", .patch = patch_ad1984 }, > >> { .id = 0x11d41986, .name = "AD1986A", .patch = patch_ad1986a }, > >> --- 3402,3408 ---- > >> { .id = 0x11d41882, .name = "AD1882", .patch = patch_ad1882 }, > >> { .id = 0x11d41884, .name = "AD1884", .patch = patch_ad1884 }, > >> { .id = 0x11d41981, .name = "AD1981", .patch = patch_ad1981 }, > >> + { .id = 0x51d41981, .name = "AD1981", .patch = patch_ad1981 }, > >> { .id = 0x11d41983, .name = "AD1983", .patch = patch_ad1983 }, > >> { .id = 0x11d41984, .name = "AD1984", .patch = patch_ad1984 }, > >> { .id = 0x11d41986, .name = "AD1986A", .patch = patch_ad1986a }, > >> > >> > >> The patch is ok? > >> > >> Thanks > >> > >> (Tobin sorry for sending messge two times) > >> > >> -- > >> Tobin Davis <tdavis@xxxxxxxxxxxx> > > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
