On Tue, Oct 12, 2021 at 09:35:16AM +0200, Takashi Iwai wrote: > On Mon, 11 Oct 2021 19:23:05 +0200, > Greg Kroah-Hartman wrote: > > > > On Mon, Oct 11, 2021 at 06:07:01PM +0200, Takashi Iwai wrote: > > > Could you also post the contents of /proc/asound/card*/usbmixer (only > > > for the corresponding device), too? > > > > Sure, here it is: > > > > USB Mixer: usb_id=0x30be0101, ctrlif=0, ctlerr=0 > > Card: Schiit Audio Schiit Hel at usb-0000:47:00.1-2.2, high speed > > Unit: 5 > > Control: name="Mic - Input Jack", index=0 > > Info: id=5, control=2, cmask=0x0, channels=1, type="BOOLEAN" > > Volume: min=0, max=1, dBmin=0, dBmax=0 > > Unit: 7 > > Control: name="Speaker - Output Jack", index=0 > > Info: id=7, control=2, cmask=0x0, channels=1, type="BOOLEAN" > > Volume: min=0, max=1, dBmin=0, dBmax=0 > > Unit: 13 > > Control: name="PCM Playback Switch", index=0 > > Info: id=13, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" > > Volume: min=0, max=1, dBmin=0, dBmax=0 > > Unit: 17 > > Control: name="Mic Capture Switch", index=0 > > Info: id=17, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" > > Volume: min=0, max=1, dBmin=0, dBmax=0 > > Unit: 18 > > Control: name="Clock Source 18 Validity", index=0 > > Info: id=18, control=2, cmask=0x0, channels=1, type="BOOLEAN" > > Volume: min=0, max=1, dBmin=0, dBmax=0 > > Unit: 22 > > Control: name="Clock Source 22 Validity", index=0 > > Info: id=22, control=2, cmask=0x0, channels=1, type="BOOLEAN" > > Volume: min=0, max=1, dBmin=0, dBmax=0 > > Hm, I expected more exotic control that failed, but it was Mic Capture > Switch, which should be treated normally. > > Could you try the patch below? This will still show other warning > messages, but it'll forcibly initialize the mixer elements at probe > time, and the rest should work. > > Once after it's confirmed to work, we may shut up the device warnings > with a quirk. Only one warning message shows up, here's the dmesg with this patch applied: [Oct12 14:39] usb 7-2.2: new high-speed USB device number 10 using xhci_hcd [ +0.123157] usb 7-2.2: New USB device found, idVendor=30be, idProduct=0101, bcdDevice= 1.02 [ +0.000009] usb 7-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000003] usb 7-2.2: Product: Schiit Hel [ +0.000002] usb 7-2.2: Manufacturer: Schiit Audio [ +0.339785] usb 7-2.2: 17:0: failed to get current value for ch 0 (-32) [ +0.020373] input: Schiit Audio Schiit Hel as /devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:08.0/0000:47:00.1/usb7/7-2/7-2.2/7-2.2:1.3/0003:30BE:0101.000B/input/input24 [ +0.056868] hid-generic 0003:30BE:0101.000B: input,hidraw6: USB HID v1.00 Device [Schiit Audio Schiit Hel] on usb-0000:47:00.1-2.2/input3 I don't see a "mic capture switch" on this device, but maybe it triggers when I plug a mic into the microphone port, which is currently empty? thanks, greg k-h
