On Mon, Oct 11, 2021 at 06:07:01PM +0200, Takashi Iwai wrote:
> On Mon, 11 Oct 2021 17:28:15 +0200,
> Greg Kroah-Hartman wrote:
> >
> > On Sun, Oct 10, 2021 at 10:25:09PM +0200, Takashi Iwai wrote:
> > > On Sun, 10 Oct 2021 14:22:41 +0200,
> > > Greg Kroah-Hartman wrote:
> > > >
> > > > The Schiit Hel device does not like to respond to all get_ctl_value_v2()
> > > > requests for some reason. This used to work in older kernels, but now
> > > > with more strict checking, this failure causes the device to fail to
> > > > work.
> > > >
> > > > Cc: Jaroslav Kysela <perex@xxxxxxxx>
> > > > Cc: Takashi Iwai <tiwai@xxxxxxxx>
> > > > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> > > > ---
> > > >
> > > > This fixes the Shiit Hel device that I have. It used to work on older
> > > > kernels (a year ago?), but stopped working for some reason and I didn't
> > > > take the time to track it down. This change fixes the issue for me, but
> > > > feels wrong for some reason. At least now I can use the device as a
> > > > headphone driver, much better than the built-in one for my current
> > > > machine...
> > > >
> > > > If needed, I can take the time to do bisection to track down the real
> > > > issue here, it might be due to stricter endpoint checking in the USB
> > > > core, but that feels wrong somehow.
> > > >
> > > > Here's the debugfs USB output for this device, showing the endpoints:
> > > >
> > > > T: Bus=07 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
> > > > D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> > > > P: Vendor=30be ProdID=0101 Rev=01.02
> > > > S: Manufacturer=Schiit Audio
> > > > S: Product=Schiit Hel
> > > > C: #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=0mA
> > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio
> > > > E: Ad=8f(I) Atr=03(Int.) MxPS= 6 Ivl=1ms
> > > > I: If#= 1 Alt= 1 #EPs= 2 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
> > > > E: Ad=05(O) Atr=05(Isoc) MxPS= 104 Ivl=125us
> > > > E: Ad=85(I) Atr=11(Isoc) MxPS= 4 Ivl=1ms
> > > > I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
> > > > E: Ad=88(I) Atr=05(Isoc) MxPS= 156 Ivl=125us
> > > > I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
> > > > E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> > > >
> > > > Any other suggestions to fix this are welcome.
> > >
> > > Could you show the exact error messages and lsusb -v output?
> > > We may paper over only the problematic node instead.
> >
> > Sure, here's the dmesg output on 5.15-rc5 when it is turned on:
> >
> > [Oct11 17:25] usb 7-2.2: new high-speed USB device number 9 using xhci_hcd
> > [ +0.122422] usb 7-2.2: New USB device found, idVendor=30be, idProduct=0101, bcdDevice= 1.02
> > [ +0.000009] usb 7-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [ +0.000002] usb 7-2.2: Product: Schiit Hel
> > [ +0.000002] usb 7-2.2: Manufacturer: Schiit Audio
> > [ +0.327172] input: Schiit Audio Schiit Hel as /devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:08.0/0000:47:00.1/usb7/7-2/7-2.2/7-2.2:1.3/0003:30BE:0101.0009/input/input21
> > [ +0.055134] hid-generic 0003:30BE:0101.0009: input,hidraw8: USB HID v1.00 Device [Schiit Audio Schiit Hel] on usb-0000:47:00.1-2.2/input3
> > [ +0.135988] usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
> > [ +0.060647] usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
> > [ +0.065362] usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
> > [ +0.192121] usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
>
> Thanks. So this happens at the unit 17, and ...
>
>
> > And here is the 'lsusb -v' output of the device.
> >
> >
> > Bus 007 Device 009: ID 30be:0101 Schiit Audio Schiit Hel
> (snip)
> > AudioControl Interface Descriptor:
> > bLength 18
> > bDescriptorType 36
> > bDescriptorSubtype 6 (FEATURE_UNIT)
> > bUnitID 17
> > bSourceID 5
> > bmaControls(0) 0x00000003
> > Mute Control (read/write)
> > bmaControls(1) 0x00000000
> > bmaControls(2) 0x00000000
> > iFeature 0
>
> ... this is the entry.
>
> Could you also post the contents of /proc/asound/card*/usbmixer (only
> for the corresponding device), too?
Sure, here it is:
USB Mixer: usb_id=0x30be0101, ctrlif=0, ctlerr=0
Card: Schiit Audio Schiit Hel at usb-0000:47:00.1-2.2, high speed
Unit: 5
Control: name="Mic - Input Jack", index=0
Info: id=5, control=2, cmask=0x0, channels=1, type="BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 7
Control: name="Speaker - Output Jack", index=0
Info: id=7, control=2, cmask=0x0, channels=1, type="BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 13
Control: name="PCM Playback Switch", index=0
Info: id=13, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 17
Control: name="Mic Capture Switch", index=0
Info: id=17, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 18
Control: name="Clock Source 18 Validity", index=0
Info: id=18, control=2, cmask=0x0, channels=1, type="BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 22
Control: name="Clock Source 22 Validity", index=0
Info: id=22, control=2, cmask=0x0, channels=1, type="BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
