The Lenovo Yoga 300-11IBR has a ACPI fwnode with a HID of DUAL250E
which contains I2C and IRQ resources for 2 accelerometers, 1 in the
display and one in the base of the device. Add support for this.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/iio/accel/bmc150-accel-i2c.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
index e24ce28a4660..b81e4005788e 100644
--- a/drivers/iio/accel/bmc150-accel-i2c.c
+++ b/drivers/iio/accel/bmc150-accel-i2c.c
@@ -24,6 +24,7 @@
#ifdef CONFIG_ACPI
static const struct acpi_device_id bmc150_acpi_dual_accel_ids[] = {
{"BOSC0200"},
+ {"DUAL250E"},
{ },
};
@@ -35,21 +36,24 @@ static void bmc150_acpi_dual_accel_probe(struct i2c_client *client)
{
struct acpi_device *adev = ACPI_COMPANION(&client->dev);
struct i2c_client *second_dev;
+ char dev_name[16];
struct i2c_board_info board_info = {
.type = "bmc150_accel",
- /*
- * The 2nd accel sits in the base of 2-in-1s. Note this
- * name is static, as there should never be more then 1
- * BOSC0200 ACPI node with 2 accelerometers in it.
- */
- .dev_name = "BOSC0200:base",
+ .dev_name = dev_name,
.fwnode = client->dev.fwnode,
- .irq = -ENOENT,
};
if (acpi_match_device_ids(adev, bmc150_acpi_dual_accel_ids))
return;
+ /*
+ * The 2nd accel sits in the base of 2-in-1s. The suffix is static, as
+ * there should never be more then 1 ACPI node with 2 accelerometers in it.
+ */
+ snprintf(dev_name, sizeof(dev_name), "%s:base", acpi_device_hid(adev));
+
+ board_info.irq = acpi_dev_gpio_irq_get_by(adev, NULL, 1);
+
second_dev = i2c_acpi_new_device(&client->dev, 1, &board_info);
if (!IS_ERR(second_dev))
bmc150_set_second_device(client, second_dev);
@@ -114,6 +118,7 @@ static const struct acpi_device_id bmc150_accel_acpi_match[] = {
{"BMA222E", bma222e},
{"BMA0280", bma280},
{"BOSC0200"},
+ {"DUAL250E"},
{ },
};
MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
--
2.31.1
