At Tue, 19 Feb 2008 16:03:18 +0100, Daniele (Mastro) wrote: > > Takashi Iwai ha scritto: > > The fix is basically the widget connection of NID 0x23 (and 0x24). > > This was uninitialized and thus pointed the wrong widget. > > Unfortunately, this connection couldn't be changed because you > > apparently have only one input source. The patch fixes this issue. > > tried the new patch > (i've compiled a today snapshot and then manually downloaded the last > patch_realtek.c version) > > the "front mic" capture now works.. > i've 2 control: front mic and mic.. only mic works > but i've a lot of crappy noise... > http://www.mediafire.com/?c1c1jly9n7e > > download this little .wav file i recorded with: > > arecord -vv -f S16_LE -c1 -r48000 -d 5 test.wav > > NOTE: while recording i see the "bar" always at 99% > > thanks for your support.. do you have any idea on what's the cause of > that noise? The mixer setting? You should set "Digital Capture Volume" 50%, corresponding to 0dB. The capture volume doesn't have to be too high, too. The vref level could be a different one depending on the mic device you are using. But VREF80 is OK in most cases. Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
