At Mon, 11 Feb 2008 23:58:33 +0100, Daniele (Mastro) wrote: > > Takashi Iwai ha scritto: > > Note that these are no errors but just debug information. > > ok.. so, are they useful? Not really in your case. > > Try the patch below. This should fix the capture source problem on > > ALC268. > > ok i'll try as soon as i can.. > with what "model" param should i create the alsa-info.sh log? test? default? Basically run alsa-info.sh on your problematic configuration you wanted to use. So, don't pass model option unless you did so in the earlier versions and it ran well. If you have another better-working configuration, take alsa-info.sh snapshot as well for comparison. > > The modem is a different problem. There are only certain model chips > > that can work with slmodemd. Non si3054-compatible (typically > > conexant ones) don't work. > > i think i was not very clear about this... > i can't see anywhere something like a modem on lspci or lsusb... i think > the modem is "inside" the audio card and for some reason it is ignored... > this is why i think it's alsa-related Sure, and as I wrote, the modem is a *different* problem from the audio problem you are facing. I'd be intereseted if it's a regression. But in other cases, it'll be likely ignored, as not fixable properly right now. Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
