The ALC3263 codec on the Dell XPS 13 9343 is also on the Dell Latitude 7350 and the Dell Venue 11 Pro 7140. These require the same handling: GPIO pin 6 needs to be set for a headset or microphone to work in the combo jack. This is implemented for the HDA driver, which always sets GPIO pin 6 on the ALC3263. It is detected using the codec vendor/device ID 0x10ec0288 and the PCI subsystem vendor ID 0x1028 (Dell). Because the I2S codec driver doesn't use PCI, adapt this by using DMI to check if Dell is the system vendor. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961 Signed-off-by: David Ward <david.ward@xxxxxxxxxx> --- sound/soc/codecs/rt286.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c index e16e7237156f..c0129edf5993 100644 --- a/sound/soc/codecs/rt286.c +++ b/sound/soc/codecs/rt286.c @@ -1120,12 +1120,11 @@ static const struct dmi_system_id force_combo_jack_table[] = { { } }; -static const struct dmi_system_id dmi_dell_dino[] = { +static const struct dmi_system_id dmi_dell[] = { { - .ident = "Dell Dino", + .ident = "Dell", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343") } }, { } @@ -1136,7 +1135,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c, { struct rt286_platform_data *pdata = dev_get_platdata(&i2c->dev); struct rt286_priv *rt286; - int i, ret, val; + int i, ret, vendor_id; rt286 = devm_kzalloc(&i2c->dev, sizeof(*rt286), GFP_KERNEL); @@ -1152,14 +1151,15 @@ static int rt286_i2c_probe(struct i2c_client *i2c, } ret = regmap_read(rt286->regmap, - RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val); + RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &vendor_id); if (ret != 0) { dev_err(&i2c->dev, "I2C error %d\n", ret); return ret; } - if (val != RT286_VENDOR_ID && val != RT288_VENDOR_ID) { + if (vendor_id != RT286_VENDOR_ID && vendor_id != RT288_VENDOR_ID) { dev_err(&i2c->dev, - "Device with ID register %#x is not rt286\n", val); + "Device with ID register %#x is not rt286\n", + vendor_id); return -ENODEV; } @@ -1183,8 +1183,8 @@ static int rt286_i2c_probe(struct i2c_client *i2c, if (pdata) rt286->pdata = *pdata; - if (dmi_check_system(force_combo_jack_table) || - dmi_check_system(dmi_dell_dino)) + if ((vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) || + dmi_check_system(force_combo_jack_table)) rt286->pdata.cbj_en = true; regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3); @@ -1223,7 +1223,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c, regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737); regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f); - if (dmi_check_system(dmi_dell_dino)) { + if (vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) { regmap_update_bits(rt286->regmap, RT286_SET_GPIO_MASK, 0x40, 0x40); regmap_update_bits(rt286->regmap, -- 2.30.1
