Re: [PATCH v11 2/3] ASoC: qcom: dt-bindings: Add sc7180 machine bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 22/10/2020 04:29, Tzung-Bi Shih wrote:
Hi, sorry for jumping into your discussion but I am trying to
summarize them to make sure we are on the same page.  Pardon me to
manually copy-and-paste partial sentences to quote.

ACK:
- Don't expose DAI connections in compatible strings.
- Use "model" DT property to make the card more UCM2-friendly.
- Expose new DT properties to distinguish different DMIC models.

NACK:
- All the board variations using exactly the same compatible string.
=> This is less realistic.  Although the CODECS information can be
retrieved from DT, it is inevitable to have some custom code for each
CODEC.

Per Mark's words:
a different CODEC is something that often justifies a separate compatible
I think we should use different compatible strings for new CODECS
combinations.  And we should try to reuse the machine driver if they
share the most code.  In the worst case, introduce a new machine
driver for the new CODECS combinations.

- Srinivas's suggestion to set driver_name.
e.g. card->driver_name = "SM8250";
=> This sounds like a new DT property should be parsed in
sound/soc/qcom/common.c.  For example: "qcom,family"?  But as we do
less care about UCM2 for now, I would prefer to just leave it as is.

No, you can just hardcode this driver_name in your machine driver rather than getting it from DT, this is how everyone does!.
So need of adding anything to common.c

The thing that I suggested to add to common.c is setting card->long_name from "model" property.


I would expect the following variants in DTS (just for example):

sound {
   compatible = "qcom,sc7180-trogdor";
Make sure that vendor name is correct here, am not sure if trogdor is qcom board or Google own board!

   model = "sc7180-rt5682-max98357a-1mic";
}

sound {
   compatible = "qcom,sc7180-trogdor";
   model = "sc7180-rt5682-max98357a-2mic";
   dmic-gpio = ...
}

sound {
   compatible = "qcom,sc7180-pompom";
   model = "sc7180-adau7002-max98357a";
}


Please correct me if there is any misunderstanding.

Looks good to me!
thanks for doing this!

--srini




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux