On Sat, 2020-10-03 at 11:02 +0200, gregkh@xxxxxxxxxxxxxxxxxxx wrote: > On Fri, Oct 02, 2020 at 05:07:13PM +0000, Sridharan, Ranjani wrote: > > On Fri, 2020-10-02 at 06:53 +0200, gregkh@xxxxxxxxxxxxxxxxxxx > > wrote: > > > On Thu, Oct 01, 2020 at 10:16:00PM +0000, Sridharan, Ranjani > > > wrote: > > > > On Thu, 2020-10-01 at 15:02 +0200, Greg KH wrote: > > > > > On Wed, Sep 30, 2020 at 03:50:47PM -0700, Dave Ertman wrote: > > > > > > From: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx> > > > > > > > > > > > > A client in the SOF (Sound Open Firmware) context is a > > > > > > device that needs to communicate with the DSP via IPC > > > > > > messages. The SOF core is responsible for serializing the > > > > > > IPC messages to the DSP from the different clients. One > > > > > > example of an SOF client would be an IPC test client that > > > > > > floods the DSP with test IPC messages to validate if the > > > > > > serialization works as expected. Multi-client support will > > > > > > also add the ability to split the existing audio cards > > > > > > into multiple ones, so as to e.g. to deal with HDMI with a > > > > > > dedicated client instead of adding HDMI to all cards. > > > > > > > > > > > > This patch introduces descriptors for SOF client driver > > > > > > and SOF client device along with APIs for registering > > > > > > and unregistering a SOF client driver, sending IPCs from > > > > > > a client device and accessing the SOF core debugfs root > > > > > > entry. > > > > > > > > > > > > Along with this, add a couple of new members to struct > > > > > > snd_sof_dev that will be used for maintaining the list of > > > > > > clients. > > > > > > > > > > > > Reviewed-by: Pierre-Louis Bossart < > > > > > > pierre-louis.bossart@xxxxxxxxxxxxxxx> > > > > > > Signed-off-by: Ranjani Sridharan < > > > > > > ranjani.sridharan@xxxxxxxxxxxxxxx > > > > > > Co-developed-by: Fred Oh <fred.oh@xxxxxxxxxxxxxxx> > > > > > > Signed-off-by: Fred Oh <fred.oh@xxxxxxxxxxxxxxx> > > > > > > Signed-off-by: Dave Ertman <david.m.ertman@xxxxxxxxx> > > > > > > --- > > > > > > sound/soc/sof/Kconfig | 19 ++++++ > > > > > > sound/soc/sof/Makefile | 3 + > > > > > > sound/soc/sof/core.c | 2 + > > > > > > sound/soc/sof/sof-client.c | 117 > > > > > > +++++++++++++++++++++++++++++++++++++ > > > > > > sound/soc/sof/sof-client.h | 65 +++++++++++++++++++++ > > > > > > sound/soc/sof/sof-priv.h | 6 ++ > > > > > > 6 files changed, 212 insertions(+) > > > > > > create mode 100644 sound/soc/sof/sof-client.c > > > > > > create mode 100644 sound/soc/sof/sof-client.h > > > > > > > > > > As you are creating new sysfs directories, you should have > > > > > some > > > > > documentation for them :( > > > > Hi Greg, > > > > > > > > We are not adding any sysfs entries in this series. > > > > > > You added directories in sysfs, right? > > Hi Greg, > > > > We are not adding any sysfs directories. > > Really? Then what does creating these new devices do in sysfs? If > nothing, then why are they being used at all? :) > > > The only change in the /sys directory will be the new ancillary > > devices created in the /sys/bus/ancillary/devices directory ie > > snd_sof_client.ipc_test.0 and snd_sof_client.ipc_test.1. > > That is what I was referring to. > > > In the following patches, we're adding debugfs entries for the ipc > > test clients but no other sysfs changes. > > > > Is it required to add documentation for these as well? > > Why would you not document them? If you don't do anything with these > devices, then why even use them? debugfs does not require sysfs > entries, so I fail to see the need for using this api at all here... Hi Greg, Pardon my ignorance here a bit. Typically, when registering platform devices, we've not added any documentation to highlight how they are used. Of course thats no excuse for not doing this right. But just to clarify so that we can fix this properly in the next version, are we expected to add documentation for the directories added in the /sys/bus (ie /sys/bus/ancillary, /sys/bus/ancillary/devices, /sys/bus/ancillary/drivers etc) and also for the devices and drivers added by the SOF driver? Thanks, Ranjani
