On Thu, Sep 17, 2020 at 04:12:28PM +0200, Cezary Rojewski wrote: > Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt > solution deprecates existing sound/soc/intel/haswell which is removed in > the following series. This cover-letter is followed by 'Developer's deep > dive' message schedding light on catpt's key concepts and areas > addressed. > > Due to high range of errors and desynchronization from recommendations > set by Windows solution, re-write came as a lower-cost solution compared > to refactoring /haswell/ with several series of patches. > > Series is dependent on linux-spi change: > spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers > https://www.spinics.net/lists/linux-spi/msg23885.html > which has been already merged and is now part of linux-spi tree. > > Bulk of series content is device driver core code - everything up to > patch 7/14 - with fs entries and trace macros introduced right after. > While each core patch is shaped in such a way that no unavailable > members are ever called, until patch 10/14 is applied, no code > compilation can occur as no Makefile is present. Once said patch is > added, Makefile and Kconfig are implemented and driver module compiles > as expected. > > > Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing > their LPT/WPT AudioDSP architecture expertise as well as helping > backtrack its historical background. > My thanks go to Amadeusz Slawinski for reviews and improvements proposed > on and off the internal list. Most of internal diff below is his > contribution. > Krzysztof Hejmowski helped me setup my own Xtensa environment and > recompile LPT/WPT FW binary sources what sped up the development greatly. > > This would not have been possible without help from these champions, > especially considering how quickly the catpt was written: 2 weeks > features, 3 weeks optimizations. Thank you. > > Userspace-exposed members are compatible with what is exposed by > deprecated solution as well as FW binary being re-used thus no harm is > done. The only visible differences are: the newly added 'Loopback Mute' > kcontrol and volume support extending to quad from stereo. > > On top of fixing erros and design flows, catpt also adds module reload, > dynamic SRAM memory allocation during PCM runtime and exposes missing > userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs > fw-version entries. Event tracing is provided to easy solution > debugging. > > Following are not included in this update and are scheduled as later > addition: > - fw logging > - module (library) support > > Note: LPT power up/down sequences might get aligned with WPT once enough > testing is done as capabilities are shared for both DSPs. > Note #2: Both LPT and WPT power up/down sequences may get optimized in > future updates as thanks to help from the Windows team, most of nuances > behind why/what/when in regard to hw registers have been backtracked and > reviewed again. > > Link to developer's deep dive message: > https://www.spinics.net/lists/alsa-devel/msg113563.html > > > Changes in v6: > - reordered and reorganized code for patches 1/13 - 8/13 of v5, so each > patches makes use of no member or function which is unavailable to it. > Series size increased from 13 to 14 patches: addition of base members > e.g.: registers has been split from addition of device.c file which > describes acpi device behavior I like how it looks now from split perspective. It misses all the rest either being addressed or commented. Can you comment on v5 why none of the change is being addressed? > Changes in v5: > https://www.spinics.net/lists/alsa-devel/msg115621.html > Basically everything below is result of Andy's review. Thank you Andy > for taking time into this detailed review > > - catpt now makes use of common linux/pxa2xx_ssp.h header file, removing > redundant SSP register declarations in the process. As stated in the > opening, this is dependent upon linux-spi change: > spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers > > - updated Kconfig by removing DMADEVICES and adding COMPILE_TEST > as optional depends-on > - updated all register macros definitions to be more safe against common > arithmetics when specifying macro's parameters > - removed CONFIG_PM and CONFIG_PM_SLEEP usage in favor of __maybe_unused > - all 'if (ret < 0)' converted to simple 'if (ret)' whenever possible > - fixed erroneous check for platform_device_register_data within > catpt_register_board() > - _SLAVE/_MASTER replaced with more inclusive _CONSUMER/_PROVIDER for > enum catpt_ssp_mode > - catpt_acpi_probe() is now making use of high-level wrappers for > ioremapping and resource assignment, reducing function's code size > - due to improved catpt_acpi_probe() behavior, catpt_acpi_remove() needs > not to cast dma_free_coherent() any longer > - DMA source and destrination maxburst now of value 16, see: > https://www.spinics.net/lists/alsa-devel/msg114394.html > > - simplified catpt_dsp_update_lpclock() as list_for_each_entry() is > empty-safe by default > - dropped '_SSP_' from all names of all CATPT_SSP_SSXXX_DEFAULT macros > - catpt_updatel_pci now makes use of linux/pci.h and uapi/linux/pci.h > constants such as: PCI_PM_CTRL_STATE_MASK and PCI_D3hot > > > Changes in v4: > https://www.spinics.net/lists/alsa-devel/msg113762.html > - fixed compilation with i386 kconfig (conflicting names) > - streamlined naming for SHIM and PCI registers to match SSP ones > (SHIM_REG -> SHIM) > - catpt_component_probe removed and kcontrols again initializzed > statically via snd_kcontrol_new array: this is to remove > kctl->id.device shenanigans > - renamed catpt_set_ctlvol to catpt_set_dspvol - function name wasn't > matching its purpose > > > Changes in v3: > - fixed IRAM mask usage in lpt_dsp_power_up (dsp.c) > - updated dbg message formatting in catpt_restore_fwimage as suggested > by Andy > - fixed alignment for struct catpt_ssp_device_format > - catpt_set_ctlvol now verifies all-equal scenario based on all > channels rather than just first two as requested by Amadeo > - fixed SPDX for registers.h > > > Changes in v2: > https://www.spinics.net/lists/alsa-devel/msg113660.html > - fixed SPDX formatting for all header files as well as pcm.c > - fixed size provided to memcpy() in fw_build_read() as reported by Mark > - renamed struct catpt_pdata to struct catpt_spec (cosmetic) > - fixed erroneous path in catpt_load_block: region is properly released > - trace.h events for updating registers have been removed and usages > replaced by dev_dbg (SRAMPGE/ LPCS) > > - as requested by Andy, struct resource has replaced struct catpt_mbank > and struct catpt_mregion. This change cascaded into: > > - catpt_mbank_size and catpt_mregion_size replaced by resource_size > - catpt_mregion_intersects replaced by resource_overlaps > - all catpt_mbank_ and catpt_mregion_ handlers found in loader.c > (_request, _reserve, _release, _extract, _split, _join) have been > removed > - __request_region and __release_region have been enlisted in their > place > - catpt_mregion_intersecting renamed to catpt_resource_overlapping > - catpt_request_region helper has been provided to deal with -size > based requests > o haven't found direct replacements in resource.c/ ioport.h for > both functions > > - catpt_mbank_create and catpt_mbank_remove renamed to catpt_sram_init > and catpt_sram_free respectively > - catpt_sram_init now returns void instead of int and has been > converted to simple initialized. This change ultimately cascaded > into: > o both SRAM banks initialization being moved to catpt_dev_init > from catpt_acpi_probe (device.c) > o catpt_dev::spec is now initialized first, with catpt_dev_init > following it soon after > o catpt_acpi_probe erroneous path has been simplified as SRAM > banks no longer need to be freed > > - catpt_sram_free now frees all resources via child -> sibling > enumeration rather than region_list iteration > - catpt_dsp_update_srampge and catpt_dsp_set_srampge now accept new > argument: unsigned long mask. Caused by removal of catpt_mbank - > mask is taken directly from catpt_dev::spec::d/iram_mask > - trace.h events for catpt_mbank and catpt_mregion have been removed > > > Diff against last drop on internal list: > https://www.spinics.net/lists/alsa-devel/msg113549.html > - replaced spinlock with mutex for mregion allocation and release to > address sleeping in atomic context warnings > - fixed coredump fw_hash dumping > - kcontrol values are now always stored regardless of stream of interest > is running or not > - kcontrol values are now applied after stream is prepared instead of > ignoring what has been set by user initially > - catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and > wpt_ respectively > - reordered Makefile .o(s) (cosmetic) > > Cezary Rojewski (14): > ASoC: Intel: Add catpt base members > ASoC: Intel: catpt: Implement IPC protocol > ASoC: Intel: catpt: Add IPC message handlers > ASoC: Intel: catpt: Define DSP operations > ASoC: Intel: catpt: Firmware loading and context restore > ASoC: Intel: catpt: PCM operations > ASoC: Intel: catpt: Device driver lifecycle > ASoC: Intel: catpt: Event tracing > ASoC: Intel: catpt: Simple sysfs attributes > ASoC: Intel: Select catpt and deprecate haswell > ASoC: Intel: haswell: Remove haswell-solution specific code > ASoC: Intel: broadwell: Remove haswell-solution specific code > ASoC: Intel: bdw-5650: Remove haswell-solution specific code > ASoC: Intel: bdw-5677: Remove haswell-solution specific code > > sound/soc/intel/Kconfig | 24 +- > sound/soc/intel/Makefile | 2 +- > sound/soc/intel/boards/Kconfig | 8 +- > sound/soc/intel/boards/bdw-rt5650.c | 36 - > sound/soc/intel/boards/bdw-rt5677.c | 33 - > sound/soc/intel/boards/broadwell.c | 33 - > sound/soc/intel/boards/haswell.c | 28 +- > sound/soc/intel/catpt/Makefile | 6 + > sound/soc/intel/catpt/core.h | 189 +++++ > sound/soc/intel/catpt/device.c | 354 ++++++++ > sound/soc/intel/catpt/dsp.c | 572 +++++++++++++ > sound/soc/intel/catpt/fs.c | 79 ++ > sound/soc/intel/catpt/ipc.c | 298 +++++++ > sound/soc/intel/catpt/loader.c | 671 +++++++++++++++ > sound/soc/intel/catpt/messages.c | 313 +++++++ > sound/soc/intel/catpt/messages.h | 401 +++++++++ > sound/soc/intel/catpt/pcm.c | 1212 +++++++++++++++++++++++++++ > sound/soc/intel/catpt/registers.h | 178 ++++ > sound/soc/intel/catpt/trace.h | 83 ++ > 19 files changed, 4377 insertions(+), 143 deletions(-) > create mode 100644 sound/soc/intel/catpt/Makefile > create mode 100644 sound/soc/intel/catpt/core.h > create mode 100644 sound/soc/intel/catpt/device.c > create mode 100644 sound/soc/intel/catpt/dsp.c > create mode 100644 sound/soc/intel/catpt/fs.c > create mode 100644 sound/soc/intel/catpt/ipc.c > create mode 100644 sound/soc/intel/catpt/loader.c > create mode 100644 sound/soc/intel/catpt/messages.c > create mode 100644 sound/soc/intel/catpt/messages.h > create mode 100644 sound/soc/intel/catpt/pcm.c > create mode 100644 sound/soc/intel/catpt/registers.h > create mode 100644 sound/soc/intel/catpt/trace.h > > -- > 2.17.1 > -- With Best Regards, Andy Shevchenko
