Hi, On 11/09/2020 19:31:40+0200, Miquel Raynal wrote: > At power-up the analog circuits may take up to one full second before > being charged with the default configuration. Using the analog blocks > before they are ready generates a *very* crappy sound. > > Enable the fast charge feature, which will require a bit more power > than normal charge but will definitely speed up the starting operation > by shrinking this delay to up to 40 ms. > > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > --- > sound/soc/codecs/tlv320aic32x4.c | 8 ++++++++ > sound/soc/codecs/tlv320aic32x4.h | 7 +++++++ > 2 files changed, 15 insertions(+) > > diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c > index 7a1ffbaf48be..5fb8ba109bc9 100644 > --- a/sound/soc/codecs/tlv320aic32x4.c > +++ b/sound/soc/codecs/tlv320aic32x4.c > @@ -1009,6 +1009,14 @@ static int aic32x4_component_probe(struct snd_soc_component *component) > AIC32X4_LADC_EN | AIC32X4_RADC_EN); > snd_soc_component_write(component, AIC32X4_ADCSETUP, tmp_reg); > > + /* > + * Enable the fast charging feature and ensure the needed 40ms ellapsed > + * before using the analog circuits. > + */ > + snd_soc_component_write(component, AIC32X4_REFPOWERUP, > + AIC32X4_REFPOWERUP_40MS); > + msleep(40); > + Maybe the actual REFPOWERUP value could be exposed as a control so userspace has a way to set the policy? I'm not sure it make sense to have the delay in probe because it is not enable the analog part of the codec. The delay should probable be after the clocks have been set up because the datasheet says that it is mdac and madc that is starting the analog circuitry. > return 0; > } > > diff --git a/sound/soc/codecs/tlv320aic32x4.h b/sound/soc/codecs/tlv320aic32x4.h > index 38f47704bb75..7550122e9f8a 100644 > --- a/sound/soc/codecs/tlv320aic32x4.h > +++ b/sound/soc/codecs/tlv320aic32x4.h > @@ -96,6 +96,7 @@ int aic32x4_register_clocks(struct device *dev, const char *mclk_name); > #define AIC32X4_FLOATINGINPUT AIC32X4_REG(1, 58) > #define AIC32X4_LMICPGAVOL AIC32X4_REG(1, 59) > #define AIC32X4_RMICPGAVOL AIC32X4_REG(1, 60) > +#define AIC32X4_REFPOWERUP AIC32X4_REG(1, 123) > > /* Bits, masks, and shifts */ > > @@ -205,6 +206,12 @@ int aic32x4_register_clocks(struct device *dev, const char *mclk_name); > #define AIC32X4_RMICPGANIN_IN1L_10K 0x10 > #define AIC32X4_RMICPGANIN_CM1R_10K 0x40 > > +/* AIC32X4_REFPOWERUP */ > +#define AIC32X4_REFPOWERUP_SLOW 0x04 > +#define AIC32X4_REFPOWERUP_40MS 0x05 > +#define AIC32X4_REFPOWERUP_80MS 0x06 > +#define AIC32X4_REFPOWERUP_120MS 0x07 > + > /* Common mask and enable for all of the dividers */ > #define AIC32X4_DIVEN BIT(7) > #define AIC32X4_DIV_MASK GENMASK(6, 0) > -- > 2.20.1 > -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
