The jack on Intel NUC 8 Rugged rear panel doesn't work. The spec [1] states that the jack supports both headphone and microphone, so override a Pin Complex which has both Amp-In and Amp-Out to make the jack work. Node 0x1b fits the requirement, and user confirmed the jack now works with new pin config. [1] https://www.intel.com/content/dam/support/us/en/documents/mini-pcs/NUC8CCH_TechProdSpec.pdf BugLink: https://bugs.launchpad.net/bugs/1875199 Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> --- sound/pci/hda/patch_realtek.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2477f3ed7237..daedcc0adc21 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6159,6 +6159,7 @@ enum { ALC269_FIXUP_CZC_L101, ALC269_FIXUP_LEMOTE_A1802, ALC269_FIXUP_LEMOTE_A190X, + ALC256_FIXUP_INTEL_NUC8_RUGGED, }; static const struct hda_fixup alc269_fixups[] = { @@ -7480,6 +7481,15 @@ static const struct hda_fixup alc269_fixups[] = { }, .chain_id = ALC269_FIXUP_DMIC, }, + [ALC256_FIXUP_INTEL_NUC8_RUGGED] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x1b, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -7777,6 +7787,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x10ec, 0x118c, "Medion EE4254 MD62100", ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE), SND_PCI_QUIRK(0x1c06, 0x2013, "Lemote A1802", ALC269_FIXUP_LEMOTE_A1802), SND_PCI_QUIRK(0x1c06, 0x2015, "Lemote A190X", ALC269_FIXUP_LEMOTE_A190X), + SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED), #if 0 /* Below is a quirk table taken from the old code. -- 2.17.1
