Re: [PATCH] ASoC: wm8962: Do not access WM8962_GPIO_BASE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Fabio, Mark

On Fri, Jul 17, 2020 at 10:02 PM Fabio Estevam <festevam@xxxxxxxxx> wrote:
>
> According to the WM8962 datasheet, there is no register at address 0x200.
>
> WM8962_GPIO_BASE is just a base address for the GPIO registers and not a
> real register, so remove it from wm8962_readable_register().
>
> Also, Register 515 (WM8962_GPIO_BASE + 3) does not exist, so skip
> its access.
>
> This fixes the following errors:
>
> wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16
> wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16
>
> Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
> ---
> Hi,
>
> There is still one more soc_component_read_no_lock error left on register 48.
>
> I can get rid of it with the below change:
>
> --- a/sound/soc/codecs/wm8962.c
> +++ b/sound/soc/codecs/wm8962.c
> @@ -151,6 +151,7 @@ static const struct reg_default wm8962_reg[] = {
>         { 40, 0x0000 },   /* R40    - SPKOUTL volume */
>         { 41, 0x0000 },   /* R41    - SPKOUTR volume */
>
> +       { 48, 0x0000 },   /* R48    - Additional control(4) */
>         { 49, 0x0010 },   /* R49    - Class D Control 1 */
>         { 51, 0x0003 },   /* R51    - Class D Control 2 */
>
> @@ -841,7 +842,6 @@ static bool wm8962_readable_register(struct device *dev, unsigned int reg)
>         case WM8962_SPKOUTL_VOLUME:
>         case WM8962_SPKOUTR_VOLUME:
>         case WM8962_THERMAL_SHUTDOWN_STATUS:
> -       case WM8962_ADDITIONAL_CONTROL_4:

WM8962_ADDITIONAL_CONTROL_4 should not be removed
from the readable registers,  after this change, there is distortion
on output sound. but this patch has been merged.

"[PATCH RESEND] ASoC: wm8962: Do not access WM8962_GPIO_BASE"
that patch is correct.

best regards
wang shengjiu

wang shengjiu


>         case WM8962_CLASS_D_CONTROL_1:
>         case WM8962_CLASS_D_CONTROL_2:
>         case WM8962_CLOCKING_4:
>
> I haven't submitted it yet because I don't know if this is the correct
> approach.
>
> Please advise.
>
> Thanks
>
>  sound/soc/codecs/wm8962.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
> index df8cdc71357d..8159a3866cde 100644
> --- a/sound/soc/codecs/wm8962.c
> +++ b/sound/soc/codecs/wm8962.c
> @@ -956,7 +956,6 @@ static bool wm8962_readable_register(struct device *dev, unsigned int reg)
>         case WM8962_EQ39:
>         case WM8962_EQ40:
>         case WM8962_EQ41:
> -       case WM8962_GPIO_BASE:
>         case WM8962_GPIO_2:
>         case WM8962_GPIO_3:
>         case WM8962_GPIO_5:
> @@ -3437,7 +3436,13 @@ static int wm8962_probe(struct snd_soc_component *component)
>         /* Save boards having to disable DMIC when not in use */
>         dmicclk = false;
>         dmicdat = false;
> -       for (i = 0; i < WM8962_MAX_GPIO; i++) {
> +       for (i = 1; i < WM8962_MAX_GPIO; i++) {
> +               /*
> +                * Register 515 (WM8962_GPIO_BASE + 3) does not exist,
> +                * so skip its access
> +                */
> +               if (i == 3)
> +                       continue;
>                 switch (snd_soc_component_read(component, WM8962_GPIO_BASE + i)
>                         & WM8962_GP2_FN_MASK) {
>                 case WM8962_GPIO_FN_DMICCLK:
> --
> 2.17.1
>



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux