According to the WM8962 datasheet, there is no register at address 0x200.
WM8962_GPIO_BASE is just a base address for the GPIO registers and not a
real register, so remove it from wm8962_readable_register().
Also, Register 515 (WM8962_GPIO_BASE + 3) does not exist, so skip
its access.
This fixes the following errors:
wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16
wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16
Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
---
Hi,
There is still one more soc_component_read_no_lock error left on register 48.
I can get rid of it with the below change:
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -151,6 +151,7 @@ static const struct reg_default wm8962_reg[] = {
{ 40, 0x0000 }, /* R40 - SPKOUTL volume */
{ 41, 0x0000 }, /* R41 - SPKOUTR volume */
+ { 48, 0x0000 }, /* R48 - Additional control(4) */
{ 49, 0x0010 }, /* R49 - Class D Control 1 */
{ 51, 0x0003 }, /* R51 - Class D Control 2 */
@@ -841,7 +842,6 @@ static bool wm8962_readable_register(struct device *dev, unsigned int reg)
case WM8962_SPKOUTL_VOLUME:
case WM8962_SPKOUTR_VOLUME:
case WM8962_THERMAL_SHUTDOWN_STATUS:
- case WM8962_ADDITIONAL_CONTROL_4:
case WM8962_CLASS_D_CONTROL_1:
case WM8962_CLASS_D_CONTROL_2:
case WM8962_CLOCKING_4:
I haven't submitted it yet because I don't know if this is the correct
approach.
Please advise.
Thanks
sound/soc/codecs/wm8962.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index df8cdc71357d..8159a3866cde 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -956,7 +956,6 @@ static bool wm8962_readable_register(struct device *dev, unsigned int reg)
case WM8962_EQ39:
case WM8962_EQ40:
case WM8962_EQ41:
- case WM8962_GPIO_BASE:
case WM8962_GPIO_2:
case WM8962_GPIO_3:
case WM8962_GPIO_5:
@@ -3437,7 +3436,13 @@ static int wm8962_probe(struct snd_soc_component *component)
/* Save boards having to disable DMIC when not in use */
dmicclk = false;
dmicdat = false;
- for (i = 0; i < WM8962_MAX_GPIO; i++) {
+ for (i = 1; i < WM8962_MAX_GPIO; i++) {
+ /*
+ * Register 515 (WM8962_GPIO_BASE + 3) does not exist,
+ * so skip its access
+ */
+ if (i == 3)
+ continue;
switch (snd_soc_component_read(component, WM8962_GPIO_BASE + i)
& WM8962_GP2_FN_MASK) {
case WM8962_GPIO_FN_DMICCLK:
--
2.17.1
