Hi Samuel!
Dne petek, 10. julij 2020 ob 07:44:33 CEST je Samuel Holland napisal(a):
> On 7/4/20 6:38 AM, Clément Péron wrote:
> > From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> >
> > H6 I2S is very similar to that in H3, except it supports up to 16
> > channels.
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
> > Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
> > ---
> >
> > sound/soc/sunxi/sun4i-i2s.c | 227 ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 227 insertions(+)
> >
> > diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> > index d0a8d5810c0a..9690389cb68e 100644
> > --- a/sound/soc/sunxi/sun4i-i2s.c
> > +++ b/sound/soc/sunxi/sun4i-i2s.c
> > @@ -124,6 +124,21 @@
> >
> > #define SUN8I_I2S_RX_CHAN_SEL_REG 0x54
> > #define SUN8I_I2S_RX_CHAN_MAP_REG 0x58
> >
> > +/* Defines required for sun50i-h6 support */
> > +#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK GENMASK(21, 20)
> > +#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset) ((offset) << 20)
> > +#define SUN50I_H6_I2S_TX_CHAN_SEL_MASK GENMASK(19, 16)
> > +#define SUN50I_H6_I2S_TX_CHAN_SEL(chan) ((chan - 1) << 16)
> > +#define SUN50I_H6_I2S_TX_CHAN_EN_MASK GENMASK(15, 0)
> > +#define SUN50I_H6_I2S_TX_CHAN_EN(num_chan) (((1 << num_chan) - 1))
> > +
> > +#define SUN50I_H6_I2S_TX_CHAN_MAP0_REG 0x44
> > +#define SUN50I_H6_I2S_TX_CHAN_MAP1_REG 0x48
> > +
> > +#define SUN50I_H6_I2S_RX_CHAN_SEL_REG 0x64
> > +#define SUN50I_H6_I2S_RX_CHAN_MAP0_REG 0x68
> > +#define SUN50I_H6_I2S_RX_CHAN_MAP1_REG 0x6C
> > +
> >
> > struct sun4i_i2s;
> >
> > /**
> >
> > @@ -466,6 +481,65 @@ static int sun8i_i2s_set_chan_cfg(const struct
> > sun4i_i2s *i2s,>
> > return 0;
> >
> > }
> >
> > +static int sun50i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> > + const struct snd_pcm_hw_params
*params)
> > +{
> > + unsigned int channels = params_channels(params);
> > + unsigned int slots = channels;
> > + unsigned int lrck_period;
> > +
> > + if (i2s->slots)
> > + slots = i2s->slots;
> > +
> > + /* Map the channels for playback and capture */
> > + regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP1_REG,
0x76543210);
> > + regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP1_REG,
0x76543210);
> > +
> > + /* Configure the channels */
> > + regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
> > + SUN50I_H6_I2S_TX_CHAN_SEL_MASK,
> > + SUN50I_H6_I2S_TX_CHAN_SEL(channels));
> > + regmap_update_bits(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_SEL_REG,
> > + SUN50I_H6_I2S_TX_CHAN_SEL_MASK,
> > + SUN50I_H6_I2S_TX_CHAN_SEL(channels));
> > +
> > + regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
> > + SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
> > +
SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM(channels));
> > + regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
> > + SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM_MASK,
> > +
SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM(channels));
> > +
> > + switch (i2s->format & SND_SOC_DAIFMT_FORMAT_MASK) {
> > + case SND_SOC_DAIFMT_DSP_A:
> > + case SND_SOC_DAIFMT_DSP_B:
> > + case SND_SOC_DAIFMT_LEFT_J:
>
> > + case SND_SOC_DAIFMT_RIGHT_J:
> According to the manual, LEFT_J and RIGHT_J should use the same calculation
> as I2S, not the one for PCM/DSP.
>
> > + lrck_period = params_physical_width(params) * slots;
> > + break;
> > +
> > + case SND_SOC_DAIFMT_I2S:
> > + lrck_period = params_physical_width(params);
> > + break;
> > +
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + if (i2s->slot_width)
> > + lrck_period = i2s->slot_width;
> > +
> > + regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
> > + SUN8I_I2S_FMT0_LRCK_PERIOD_MASK,
> > + SUN8I_I2S_FMT0_LRCK_PERIOD(lrck_period));
>
> From the description in the manual, this looks off by one. The number of
> BCLKs per LRCK is LRCK_PERIOD + 1.
Are you sure? Macro SUN8I_I2S_FMT0_LRCK_PERIOD() is defined as follows:
#define SUN8I_I2S_FMT0_LRCK_PERIOD(period) ((period - 1) << 8)
which already lowers value by 1.
Best regards,
Jernej
>
> > +
> > + regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
> > + SUN50I_H6_I2S_TX_CHAN_EN_MASK,
> > + SUN50I_H6_I2S_TX_CHAN_EN(channels));
> > +
> > + return 0;
> > +}
> > +
> >
> > static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
> >
> > struct snd_pcm_hw_params *params,
> > struct snd_soc_dai *dai)
> >
> > @@ -691,6 +765,108 @@ static int sun8i_i2s_set_soc_fmt(const struct
> > sun4i_i2s *i2s,>
> > return 0;
> >
> > }
> >
> > +static int sun50i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
> > + unsigned int fmt)
> > +{
> > + u32 mode, val;
> > + u8 offset;
> > +
> > + /*
> > + * DAI clock polarity
> > + *
> > + * The setup for LRCK contradicts the datasheet, but under a
> > + * scope it's clear that the LRCK polarity is reversed
> > + * compared to the expected polarity on the bus.
> > + */
>
> This comment makes us sound a lot more confident than I think we actually
> are.
>
> Regards,
> Samuel
