Re: [linux-sunxi] [PATCH 01/16] ASoC: sun4i-i2s: Add support for H6 I2S

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/4/20 6:38 AM, Clément Péron wrote:
> From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> 
> H6 I2S is very similar to that in H3, except it supports up to 16
> channels.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
> Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
> ---
>  sound/soc/sunxi/sun4i-i2s.c | 227 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 227 insertions(+)
> 
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index d0a8d5810c0a..9690389cb68e 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -124,6 +124,21 @@
>  #define SUN8I_I2S_RX_CHAN_SEL_REG	0x54
>  #define SUN8I_I2S_RX_CHAN_MAP_REG	0x58
>  
> +/* Defines required for sun50i-h6 support */
> +#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK	GENMASK(21, 20)
> +#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset)	((offset) << 20)
> +#define SUN50I_H6_I2S_TX_CHAN_SEL_MASK		GENMASK(19, 16)
> +#define SUN50I_H6_I2S_TX_CHAN_SEL(chan)		((chan - 1) << 16)
> +#define SUN50I_H6_I2S_TX_CHAN_EN_MASK		GENMASK(15, 0)
> +#define SUN50I_H6_I2S_TX_CHAN_EN(num_chan)	(((1 << num_chan) - 1))
> +
> +#define SUN50I_H6_I2S_TX_CHAN_MAP0_REG	0x44
> +#define SUN50I_H6_I2S_TX_CHAN_MAP1_REG	0x48
> +
> +#define SUN50I_H6_I2S_RX_CHAN_SEL_REG	0x64
> +#define SUN50I_H6_I2S_RX_CHAN_MAP0_REG	0x68
> +#define SUN50I_H6_I2S_RX_CHAN_MAP1_REG	0x6C
> +
>  struct sun4i_i2s;
>  
>  /**
> @@ -466,6 +481,65 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
>  	return 0;
>  }
>  
> +static int sun50i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> +				   const struct snd_pcm_hw_params *params)
> +{
> +	unsigned int channels = params_channels(params);
> +	unsigned int slots = channels;
> +	unsigned int lrck_period;
> +
> +	if (i2s->slots)
> +		slots = i2s->slots;
> +
> +	/* Map the channels for playback and capture */
> +	regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP1_REG, 0x76543210);
> +	regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP1_REG, 0x76543210);
> +
> +	/* Configure the channels */
> +	regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
> +			   SUN50I_H6_I2S_TX_CHAN_SEL_MASK,
> +			   SUN50I_H6_I2S_TX_CHAN_SEL(channels));
> +	regmap_update_bits(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_SEL_REG,
> +			   SUN50I_H6_I2S_TX_CHAN_SEL_MASK,
> +			   SUN50I_H6_I2S_TX_CHAN_SEL(channels));
> +
> +	regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
> +			   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
> +			   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM(channels));
> +	regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
> +			   SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM_MASK,
> +			   SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM(channels));
> +
> +	switch (i2s->format & SND_SOC_DAIFMT_FORMAT_MASK) {
> +	case SND_SOC_DAIFMT_DSP_A:
> +	case SND_SOC_DAIFMT_DSP_B:
> +	case SND_SOC_DAIFMT_LEFT_J:
> +	case SND_SOC_DAIFMT_RIGHT_J:

According to the manual, LEFT_J and RIGHT_J should use the same calculation as
I2S, not the one for PCM/DSP.

> +		lrck_period = params_physical_width(params) * slots;
> +		break;
> +
> +	case SND_SOC_DAIFMT_I2S:
> +		lrck_period = params_physical_width(params);
> +		break;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	if (i2s->slot_width)
> +		lrck_period = i2s->slot_width;
> +
> +	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
> +			   SUN8I_I2S_FMT0_LRCK_PERIOD_MASK,
> +			   SUN8I_I2S_FMT0_LRCK_PERIOD(lrck_period));

>From the description in the manual, this looks off by one. The number of BCLKs
per LRCK is LRCK_PERIOD + 1.

> +
> +	regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
> +			   SUN50I_H6_I2S_TX_CHAN_EN_MASK,
> +			   SUN50I_H6_I2S_TX_CHAN_EN(channels));
> +
> +	return 0;
> +}
> +
>  static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
>  			       struct snd_pcm_hw_params *params,
>  			       struct snd_soc_dai *dai)
> @@ -691,6 +765,108 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
>  	return 0;
>  }
>  
> +static int sun50i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
> +				  unsigned int fmt)
> +{
> +	u32 mode, val;
> +	u8 offset;
> +
> +	/*
> +	 * DAI clock polarity
> +	 *
> +	 * The setup for LRCK contradicts the datasheet, but under a
> +	 * scope it's clear that the LRCK polarity is reversed
> +	 * compared to the expected polarity on the bus.
> +	 */

This comment makes us sound a lot more confident than I think we actually are.

Regards,
Samuel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux