On Tue, Jun 30, 2020 at 4:09 AM Nicolin Chen <nicoleotsuka@xxxxxxxxx> wrote:
>
> On Mon, Jun 29, 2020 at 09:58:35PM +0800, Shengjiu Wang wrote:
> > The ASRC not only supports ideal ratio mode, but also supports
> > internal ratio mode.
> >
> > For internal rato mode, the rate of clock source should be divided
> > with no remainder by sample rate, otherwise there is sound
> > distortion.
> >
> > Add function fsl_asrc_select_clk() to find proper clock source for
> > internal ratio mode, if the clock source is available then internal
> > ratio mode will be selected.
> >
> > With change, the ideal ratio mode is not the only option for user.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> > ---
>
> > +static int fsl_asrc_select_clk(struct fsl_asrc_priv *asrc_priv,
> > + struct fsl_asrc_pair *pair,
> > + int in_rate,
> > + int out_rate)
> > +{
> > + struct fsl_asrc_pair_priv *pair_priv = pair->private;
> > + struct asrc_config *config = pair_priv->config;
> > + int rate[2], select_clk[2]; /* Array size 2 means IN and OUT */
> > + int clk_rate, clk_index;
> > + int i = 0, j = 0;
> > + bool clk_sel[2];
> > +
> > + rate[0] = in_rate;
> > + rate[1] = out_rate;
> > +
> > + /* Select proper clock source for internal ratio mode */
> > + for (j = 0; j < 2; j++) {
> > + for (i = 0; i < ASRC_CLK_MAP_LEN; i++) {
> > + clk_index = asrc_priv->clk_map[j][i];
> > + clk_rate = clk_get_rate(asrc_priv->asrck_clk[clk_index]);
>
> + /* Only match a perfect clock source with no remainder */
>
> > + if (clk_rate != 0 && (clk_rate / rate[j]) <= 1024 &&
> > + (clk_rate % rate[j]) == 0)
> > + break;
> > + }
> > +
> > + if (i == ASRC_CLK_MAP_LEN) {
> > + select_clk[j] = OUTCLK_ASRCK1_CLK;
> > + clk_sel[j] = false;
> > + } else {
> > + select_clk[j] = i;
> > + clk_sel[j] = true;
> > + }
> > + }
> > +
> > + /* Switch to ideal ratio mode if there is no proper clock source */
> > + if (!clk_sel[IN] || !clk_sel[OUT])
> > + select_clk[IN] = INCLK_NONE;
>
> Could get rid of clk_set:
>
> for (j) {
> for (i) {
> if (match)
> break;
> }
>
> clk[j] = i;
> }
>
> if (clk[IN] == ASRC_CLK_MAP_LEN || clk[OUT] == ASRC_CLK_MAP_LEN)
>
> And it only overrides clk[IN] setting but leaving clk[OUT] to
> to the searching result. This means that clk[OUT] may be using
> a clock source other than OUTCLK_ASRCK1_CLK if sel[IN] happens
> to be false while sel[OUT] happens to be true. Not sure if it
> is intended...but I feel it would probably be safer to use the
> previous settings: INCLK_NONE + OUTCLK_ASRCK1_CLK?
ok, will update the patch.
best regards
wang shengjiu
