Convert the UniPhier AIO audio system binding to DT schema format. Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> --- Changes in v2: - Add schema for subnode 'port' .../sound/socionext,uniphier-aio.yaml | 81 +++++++++++++++++++ .../bindings/sound/uniphier,aio.txt | 45 ----------- 2 files changed, 81 insertions(+), 45 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml delete mode 100644 Documentation/devicetree/bindings/sound/uniphier,aio.txt diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml new file mode 100644 index 000000000000..4987eb91f2ab --- /dev/null +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/socionext,uniphier-aio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier AIO audio system + +maintainers: + - <alsa-devel@xxxxxxxxxxxxxxxx> + +properties: + compatible: + enum: + - socionext,uniphier-ld11-aio + - socionext,uniphier-ld20-aio + - socionext,uniphier-pxs2-aio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: aio + + clocks: + maxItems: 1 + + reset-names: + const: aio + + resets: + maxItems: 1 + + socionext,syscon: + description: | + Specifies a phandle to soc-glue, which is used for changing mode of S/PDIF + signal pin to output from Hi-Z. This property is optional if you use I2S + signal pins only. + $ref: "/schemas/types.yaml#/definitions/phandle" + + "#sound-dai-cells": + const: 1 + +patternProperties: + "^port@[0-9]$": + type: object + properties: + endpoint: true + required: + - endpoint + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + - reset-names + - resets + - "#sound-dai-cells" + +examples: + - | + audio@56000000 { + compatible = "socionext,uniphier-ld20-aio"; + reg = <0x56000000 0x80000>; + interrupts = <0 144 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aout>; + clock-names = "aio"; + clocks = <&sys_clk 40>; + reset-names = "aio"; + resets = <&sys_rst 40>; + #sound-dai-cells = <1>; + socionext,syscon = <&soc_glue>; + }; diff --git a/Documentation/devicetree/bindings/sound/uniphier,aio.txt b/Documentation/devicetree/bindings/sound/uniphier,aio.txt deleted file mode 100644 index 4ce68ed6f2f2..000000000000 --- a/Documentation/devicetree/bindings/sound/uniphier,aio.txt +++ /dev/null @@ -1,45 +0,0 @@ -Socionext UniPhier SoC audio driver - -The Socionext UniPhier audio subsystem consists of I2S and S/PDIF blocks in -the same register space. - -Required properties: -- compatible : should be one of the following: - "socionext,uniphier-ld11-aio" - "socionext,uniphier-ld20-aio" - "socionext,uniphier-pxs2-aio" -- reg : offset and length of the register set for the device. -- interrupts : should contain I2S or S/PDIF interrupt. -- pinctrl-names : should be "default". -- pinctrl-0 : defined I2S signal pins for an external codec chip. -- clock-names : should include following entries: - "aio" -- clocks : a list of phandle, should contain an entry for each - entry in clock-names. -- reset-names : should include following entries: - "aio" -- resets : a list of phandle, should contain an entry for each - entry in reset-names. -- #sound-dai-cells: should be 1. - -Optional properties: -- socionext,syscon: a phandle, should contain soc-glue. - The soc-glue is used for changing mode of S/PDIF signal pin - to Output from Hi-Z. This property is optional if you use - I2S signal pins only. - -Example: - audio { - compatible = "socionext,uniphier-ld20-aio"; - reg = <0x56000000 0x80000>; - interrupts = <0 144 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aout>; - clock-names = "aio"; - clocks = <&sys_clk 40>; - reset-names = "aio"; - resets = <&sys_rst 40>; - #sound-dai-cells = <1>; - - socionext,syscon = <&sg>; - }; -- 2.25.1
