Hi, I am writting an alsa application and while working on pcm status timings, I noticed that setting monotonic_raw timings in sw_params while the hardware device plugin is already running with monotonic timings did not produce an error. Follow the pcm dump which shows monotonic_raw being set on all plugin instances but the already running hw plugin instance. Is this a bug, or am I doing something the wrong way? Plug PCM: Linear Integer <-> Linear Float conversion PCM (S32_LE) Its setup is: stream : PLAYBACK access : RW_NONINTERLEAVED format : FLOAT_LE subformat : STD channels : 2 rate : 48000 exact rate : 48000 (48000/1) msbits : 32 buffer_size : 8192 period_size : 1024 period_time : 21333 tstamp_mode : ENABLE tstamp_type : MONOTONIC_RAW period_step : 1 avail_min : 1024 period_event : 1 start_threshold : 1 stop_threshold : 8192 silence_threshold: 0 silence_size : 0 boundary : 4611686018427387904 Slave: Direct Stream Mixing PCM Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 48000 exact rate : 48000 (48000/1) msbits : 32 buffer_size : 8192 period_size : 1024 period_time : 21333 tstamp_mode : ENABLE tstamp_type : MONOTONIC_RAW period_step : 1 avail_min : 1024 period_event : 1 start_threshold : 1 stop_threshold : 8192 silence_threshold: 0 silence_size : 0 boundary : 4611686018427387904 Hardware PCM card 0 'HDA ATI SB' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 48000 exact rate : 48000 (48000/1) msbits : 32 buffer_size : 8192 period_size : 1024 period_time : 21333 tstamp_mode : ENABLE tstamp_type : MONOTONIC period_step : 1 avail_min : 1024 period_event : 0 start_threshold : 1 stop_threshold : 0 silence_threshold: 0 silence_size : 0 boundary : 4611686018427387904 appl_ptr : 0 hw_ptr : 1484839806 cheers, -- Sylvain
