Hi there,
A large number of audio codecs allow different formats for playback and
capture. This becomes very useful when there are different latencies
between playback and capture hardware data lines. For example digital
isolation chips typically have a 1 bit delay in propagation as the bit
clock rate gets faster for higher sample rates. By setting the capture
and playback formats to differ by one or two bit clock cycles, the delay
problem is solved.
There doesn't seem to be a simple way to detect stream direction in the
codec driver's set_fmt function.
The snd_soc_runtime_set_dai_fmt function :
https://github.com/torvalds/linux/blob/master/sound/soc/soc-core.c#L1480
calls the snd_soc_dai_set_fmt function :
https://github.com/torvalds/linux/blob/master/sound/soc/soc-dai.c#L101
which calls the set_fmt function :
https://github.com/torvalds/linux/blob/master/include/sound/soc-dai.h#L189
The snd_soc_dai_ops set_fmt function is defined as :
int (*set_fmt)(struct snd_soc_dai *dai, unsigned int fmt);
Is there a simple way to find the stream direction from a snd_soc_dai ?
If the stream direction can be detected then the playback and capture
formats can be set independently for the codec.
It there a different way to set the playback and capture formats for the
codec independently at runtime, depending on the sample rate ?
Matt
