Dne 09. 02. 20 v 16:47 Adam Serbinski napsal(a):
This makes it possible for the backend sample rate to be
set to 8000 or 16000 Hz, depending on the needs of the HFP
call being set up.
Two points:
Why enum? It adds just more code than the integer value handlers.
Also, this belongs to the PCM interface, so it should be handled with
SNDRV_CTL_ELEM_IFACE_PCM not mixer.
The name should be probably "Rate" and assigned to the corresponding PCM device.
Add this to Documentation/sound/designs/control-names.rst .
Jaroslav
Signed-off-by: Adam Serbinski <adam@xxxxxxxxxxxxx>
CC: Andy Gross <agross@xxxxxxxxxx>
CC: Mark Rutland <mark.rutland@xxxxxxx>
CC: Liam Girdwood <lgirdwood@xxxxxxxxx>
CC: Patrick Lai <plai@xxxxxxxxxxxxxx>
CC: Banajit Goswami <bgoswami@xxxxxxxxxxxxxx>
CC: Jaroslav Kysela <perex@xxxxxxxx>
CC: Takashi Iwai <tiwai@xxxxxxxx>
CC: alsa-devel@xxxxxxxxxxxxxxxx
CC: linux-arm-msm@xxxxxxxxxxxxxxx
CC: devicetree@xxxxxxxxxxxxxxx
CC: linux-kernel@xxxxxxxxxxxxxxx
---
sound/soc/qcom/apq8096.c | 92 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 90 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c
index 1edcaa15234f..882f2c456321 100644
--- a/sound/soc/qcom/apq8096.c
+++ b/sound/soc/qcom/apq8096.c
@@ -16,6 +16,9 @@
#define MI2S_BCLK_RATE 1536000
#define PCM_BCLK_RATE 1024000
+static int pri_pcm_sample_rate = 16000;
+static int quat_pcm_sample_rate = 16000;
+
static int msm_snd_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -33,10 +36,15 @@ static int msm_snd_hw_params(struct snd_pcm_substream *substream,
switch (cpu_dai->id) {
case PRIMARY_PCM_RX:
case PRIMARY_PCM_TX:
+ rate->min = pri_pcm_sample_rate;
+ rate->max = pri_pcm_sample_rate;
+ channels->min = 1;
+ channels->max = 1;
+ break;
case QUATERNARY_PCM_RX:
case QUATERNARY_PCM_TX:
- rate->min = 16000;
- rate->max = 16000;
+ rate->min = quat_pcm_sample_rate;
+ rate->max = quat_pcm_sample_rate;
channels->min = 1;
channels->max = 1;
break;
@@ -121,6 +129,83 @@ static struct snd_soc_ops apq8096_ops = {
.startup = msm_snd_startup,
};
+static char const *pcm_sample_rate_text[] = {"8 kHz", "16 kHz"};
+static const struct soc_enum pcm_snd_enum =
+ SOC_ENUM_SINGLE_EXT(2, pcm_sample_rate_text);
+
+static int get_sample_rate_idx(int sample_rate)
+{
+ int sample_rate_idx = 0;
+
+ switch (sample_rate) {
+ case 8000:
+ sample_rate_idx = 0;
+ break;
+ case 16000:
+ default:
+ sample_rate_idx = 1;
+ break;
+ }
+
+ return sample_rate_idx;
+}
+
+static int pri_pcm_sample_rate_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] =
+ get_sample_rate_idx(pri_pcm_sample_rate);
+ return 0;
+}
+
+static int quat_pcm_sample_rate_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] =
+ get_sample_rate_idx(quat_pcm_sample_rate);
+ return 0;
+}
+
+static int get_sample_rate(int idx)
+{
+ int sample_rate_val = 0;
+
+ switch (idx) {
+ case 0:
+ sample_rate_val = 8000;
+ break;
+ case 1:
+ default:
+ sample_rate_val = 16000;
+ break;
+ }
+
+ return sample_rate_val;
+}
+
+static int pri_pcm_sample_rate_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ pri_pcm_sample_rate =
+ get_sample_rate(ucontrol->value.integer.value[0]);
+ return 0;
+}
+
+static int quat_pcm_sample_rate_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ quat_pcm_sample_rate =
+ get_sample_rate(ucontrol->value.integer.value[0]);
+ return 0;
+}
+
+static const struct snd_kcontrol_new card_controls[] = {
+ SOC_ENUM_EXT("PRI_PCM SampleRate", pcm_snd_enum,
+ pri_pcm_sample_rate_get, pri_pcm_sample_rate_put),
+ SOC_ENUM_EXT("QUAT_PCM SampleRate", pcm_snd_enum,
+ quat_pcm_sample_rate_get, quat_pcm_sample_rate_put),
+};
+
static int apq8096_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_dai *codec_dai = rtd->codec_dai;
@@ -182,6 +267,9 @@ static int apq8096_platform_probe(struct platform_device *pdev)
if (ret)
goto err_card_register;
+ snd_soc_add_card_controls(card, card_controls,
+ ARRAY_SIZE(card_controls));
+
return 0;
err_card_register:
--
Jaroslav Kysela <perex@xxxxxxxx>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
