This patch set implements PCM audio support in qdsp6 and PCM and MI2S in apq8096/db820c to enable use of bluetooth audio codec and external MI2S port on db820c. The db820c uses qca6174a for bluetooth, which by default is configured to use what qualcomm refers to as "PCM" format, which is a variation of TDM. CC: Andy Gross <agross@xxxxxxxxxx> CC: Mark Rutland <mark.rutland@xxxxxxx> CC: Liam Girdwood <lgirdwood@xxxxxxxxx> CC: Patrick Lai <plai@xxxxxxxxxxxxxx> CC: Banajit Goswami <bgoswami@xxxxxxxxxxxxxx> CC: Jaroslav Kysela <perex@xxxxxxxx> CC: Takashi Iwai <tiwai@xxxxxxxx> CC: alsa-devel@xxxxxxxxxxxxxxxx CC: linux-arm-msm@xxxxxxxxxxxxxxx CC: devicetree@xxxxxxxxxxxxxxx CC: linux-kernel@xxxxxxxxxxxxxxx Adam Serbinski (8): ASoC: qdsp6: dt-bindings: Add q6afe pcm dt binding ASoC: qdsp6: q6afe: add support to pcm ports ASoC: qdsp6: q6afe-dai: add support to pcm port dais ASoC: qdsp6: q6routing: add pcm port routing ASoC: qcom: apq8096: add support for primary and quaternary I2S/PCM ASoC: qcom/common: Use snd-soc-dummy-dai when codec is not specified dts: msm8996/db820c: enable primary pcm and quaternary i2s ASoC: qcom: apq8096: add kcontrols to set PCM rate arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 113 +++++++++ arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 162 ++++++++++++ include/dt-bindings/sound/qcom,q6afe.h | 8 + sound/soc/qcom/apq8096.c | 172 +++++++++++-- sound/soc/qcom/common.c | 22 +- sound/soc/qcom/qdsp6/q6afe-dai.c | 198 ++++++++++++++- sound/soc/qcom/qdsp6/q6afe.c | 246 +++++++++++++++++++ sound/soc/qcom/qdsp6/q6afe.h | 9 +- sound/soc/qcom/qdsp6/q6routing.c | 44 ++++ 9 files changed, 953 insertions(+), 21 deletions(-) -- 2.21.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
