They unmute with standard sound controls:
static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
...
SOC_SINGLE("Capture Switch", SGTL5000_CHIP_ANA_CTRL, 0, 1, 1),
...
SOC_SINGLE("Headphone Playback Switch", SGTL5000_CHIP_ANA_CTRL, 4, 1, 1),
...
SOC_SINGLE("Lineout Playback Switch", SGTL5000_CHIP_ANA_CTRL, 8, 1, 1),
...
We tested this standard solution using gstreamer and standard ALSA
tools like aplay, arecord and all these tools unmute needed blocks
successfully.
On Thu, Dec 12, 2019 at 12:08 PM Alison Wang <alison.wang@xxxxxxx> wrote:
>
> Hi, Oleksandr,
>
> In your patch, outputs and ADC are muted on driver probing. I don't know when and
> where they can be unmuted in the kernel before playing in the application.
>
> Could you please give me some ideas?
>
>
> Best Regards,
> Alison Wang
>
> > -----Original Message-----
> > From: Alison Wang
> > Sent: Thursday, December 12, 2019 5:25 PM
> > To: Oleksandr Suvorov <oleksandr.suvorov@xxxxxxxxxxx>
> > Cc: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>; Igor Opaniuk
> > <igor.opaniuk@xxxxxxxxxxx>; festevam@xxxxxxxxx; broonie@xxxxxxxxxx;
> > lgirdwood@xxxxxxxxx; alsa-devel@xxxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx
> > Subject: RE: [EXT] Re: [PATCH] ASoC: sgtl5000: Revert "ASoC: sgtl5000: Fix of
> > unmute outputs on probe"
> >
> > Hi, Oleksandr,
> >
> > I think I have explained the reason in my email which sent to you yesterday. I
> > attached it too.
> > According to my test on the boards, MUTE_LO, MUTE_HP and MUTE_ADC are
> > all muted when playing the sound.
> >
> > Could you give me some ideas about this issue?
> >
> >
> > Best Regards,I
> > Alison Wang
> >
> >
> > > -----Original Message-----
> > > From: Oleksandr Suvorov <oleksandr.suvorov@xxxxxxxxxxx>
> > > Sent: Thursday, December 12, 2019 5:11 PM
> > > To: Alison Wang <alison.wang@xxxxxxx>
> > > Cc: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>; Igor Opaniuk
> > > <igor.opaniuk@xxxxxxxxxxx>; festevam@xxxxxxxxx; broonie@xxxxxxxxxx;
> > > lgirdwood@xxxxxxxxx; Oleksandr Suvorov
> > <oleksandr.suvorov@xxxxxxxxxxx>;
> > > alsa-devel@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> > > Subject: [EXT] Re: [PATCH] ASoC: sgtl5000: Revert "ASoC: sgtl5000: Fix of
> > > unmute outputs on probe"
> > >
> > > Caution: EXT Email
> > >
> > > Alison, could you please explain, what reason to revert this fix? All these
> > blocks
> > > have their own control and unmute on demand.
> > > Why do you stand on unconditional unmuting of outputs and ADC on driver
> > > probing?
> > >
> > > On Thu, Dec 12, 2019 at 9:20 AM Alison Wang <alison.wang@xxxxxxx>
> > > wrote:
> > > >
> > > > This reverts commit 631bc8f0134ae9620d86a96b8c5f9445d91a2dca.
> > > >
> > > > In commit 631bc8f0134a, snd_soc_component_update_bits is used instead
> > > > of snd_soc_component_write. Although EN_HP_ZCD and EN_ADC_ZCD are
> > > > enabled in ANA_CTRL register, MUTE_LO, MUTE_HP and MUTE_ADC bits
> > are
> > > > remained as the default value. It causes LO, HP and ADC are all muted
> > > > after driver probe.
> > > >
> > > > The patch is to revert this commit, snd_soc_component_write is still
> > > > used and MUTE_LO, MUTE_HP and MUTE_ADC are set as zero (unmuted).
> > > >
> > > > Signed-off-by: Alison Wang <alison.wang@xxxxxxx>
> > > > ---
> > > > sound/soc/codecs/sgtl5000.c | 6 +++---
> > > > 1 file changed, 3 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
> > > > index aa1f963..0b35fca 100644
> > > > --- a/sound/soc/codecs/sgtl5000.c
> > > > +++ b/sound/soc/codecs/sgtl5000.c
> > > > @@ -1458,7 +1458,6 @@ static int sgtl5000_probe(struct
> > > snd_soc_component *component)
> > > > int ret;
> > > > u16 reg;
> > > > struct sgtl5000_priv *sgtl5000 =
> > > snd_soc_component_get_drvdata(component);
> > > > - unsigned int zcd_mask = SGTL5000_HP_ZCD_EN |
> > > SGTL5000_ADC_ZCD_EN;
> > > >
> > > > /* power up sgtl5000 */
> > > > ret = sgtl5000_set_power_regs(component);
> > > > @@ -1486,8 +1485,9 @@ static int sgtl5000_probe(struct
> > > snd_soc_component *component)
> > > > 0x1f);
> > > > snd_soc_component_write(component,
> > > SGTL5000_CHIP_PAD_STRENGTH,
> > > > reg);
> > > >
> > > > - snd_soc_component_update_bits(component,
> > > SGTL5000_CHIP_ANA_CTRL,
> > > > - zcd_mask, zcd_mask);
> > > > + snd_soc_component_write(component,
> > > SGTL5000_CHIP_ANA_CTRL,
> > > > + SGTL5000_HP_ZCD_EN |
> > > > + SGTL5000_ADC_ZCD_EN);
> > > >
> > > > snd_soc_component_update_bits(component,
> > > SGTL5000_CHIP_MIC_CTRL,
> > > > SGTL5000_BIAS_R_MASK,
> > > > --
> > > > 2.9.5
> > > >
> > >
> > >
> > > --
> > > Best regards
> > > Oleksandr Suvorov
> > >
> > > Toradex AG
> > > Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
> > > 4800 (main line)
--
Best regards
Oleksandr Suvorov
Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
