This reverts commit 631bc8f0134ae9620d86a96b8c5f9445d91a2dca. In commit 631bc8f0134a, snd_soc_component_update_bits is used instead of snd_soc_component_write. Although EN_HP_ZCD and EN_ADC_ZCD are enabled in ANA_CTRL register, MUTE_LO, MUTE_HP and MUTE_ADC bits are remained as the default value. It causes LO, HP and ADC are all muted after driver probe. The patch is to revert this commit, snd_soc_component_write is still used and MUTE_LO, MUTE_HP and MUTE_ADC are set as zero (unmuted). Signed-off-by: Alison Wang <alison.wang@xxxxxxx> --- sound/soc/codecs/sgtl5000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index aa1f963..0b35fca 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1458,7 +1458,6 @@ static int sgtl5000_probe(struct snd_soc_component *component) int ret; u16 reg; struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); - unsigned int zcd_mask = SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN; /* power up sgtl5000 */ ret = sgtl5000_set_power_regs(component); @@ -1486,8 +1485,9 @@ static int sgtl5000_probe(struct snd_soc_component *component) 0x1f); snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg); - snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL, - zcd_mask, zcd_mask); + snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL, + SGTL5000_HP_ZCD_EN | + SGTL5000_ADC_ZCD_EN); snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL, SGTL5000_BIAS_R_MASK, -- 2.9.5 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
