> > Yes, that's right. I have put in a request with our HW team to again clarify > timings, but still awaiting feedback. > > The driver already warns via the kernel logs when SRM lock fails as follows: > > dev_warn(component->dev, "SRM failed to lock\n"); > > What else do you think is needed? > Hi Adam, Let's say that the SRM locks in the second loop. The 50ms delay was applied but there is no kernel log message about it because the value of srm_lock is already true when exiting the loop. If we can print every SRM lock fail before msleep() call, it would be a helpful for people resolving timing issues like Cold latency. do { pll_status = snd_soc_component_read32(component, DA7219_PLL_SRM_STS); if (pll_status & DA7219_PLL_SRM_STS_SRM_LOCK) { break; } else { ++i; dev_warn(component->dev, "SRM failed to lock, retry in 50ms\n"); msleep(50); } } while (i < DA7219_SRM_CHECK_RETRIES); Regards, Brent _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel