Hi Grant, On Thu, 2007-08-09 at 11:49 -0600, Grant Likely wrote: > > diff --git a/sound/ppc/Makefile b/sound/ppc/Makefile > > index eacee2d..827f2f5 100644 > > --- a/sound/ppc/Makefile > > +++ b/sound/ppc/Makefile > > Couldn't this end up on MicroBlaze too? If so, sound/ppc is the wrong place. Well, I don't know. The only arch depended calls I use (am aware of) are in/out_be32(), so this _might_ work for mb, too. (I won't be able to test that in the next few months ...) On Thu, 2007-08-09 at 11:17 -0700, Stephen Neuendorffer wrote: > I second grant here... this should eventually work on microblaze, too, > so putting it drivers/ and using XILINX_DRIVERS instead of XILINX_VIRTEX > (based on the patch Wolfgang recently posted) would probably be preferable. > > > + > > +config SND_ML403_AC97CR > > + tristate "Xilinx ML403 AC97 Controller Reference" > > + depends on SND && XILINX_VIRTEX > > Steve So, like Stephen Neuendorffer said, I should move it to sound/drivers, right? Takashi? On Thu, 2007-08-09 at 11:49 -0600, Grant Likely wrote: > > +snd-ml403_ac97cr-objs := ml403_ac97cr.o > > This line is only needed if you're compiling multiple .c files into one .ko Ah, well, then I have to rename the main .c file. But all the other ALSA drivers seem to _not_ include the "snd-" in front of it (ok, except the new PS3 driver and maybe other new ones?) > I'll try adding your patches to my tree this afternoon. I made patch against your tree, too (like a said before). Tell me, then I post it ... Joachim _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
