At Mon, 9 Jul 2007 16:36:35 +0200, Xavi de Blas wrote: > > 2007/7/9, Takashi Iwai <tiwai@xxxxxxx>: > > At Mon, 9 Jul 2007 15:58:30 +0200, > > Xavi de Blas wrote: > > > > > > 2007/7/9, Takashi Iwai <tiwai@xxxxxxx>: > > > > At Mon, 9 Jul 2007 15:26:59 +0200, > > > > Xavi de Blas wrote: > > > > > > > > > > Hello > > > > > > > > > > 2007/7/9, Takashi Iwai <tiwai@xxxxxxx>: > > > > > > At Mon, 9 Jul 2007 14:16:43 +0200, > > > > > > Xavi de Blas wrote: > > > > > > > > > > > > > > Hello, I installed Wine on my Ubuntu Feisty on IBM-lenovo X60s, and > > > > > > > after reboot, sound never worked again. > > > > > > > > > > > > > > I tried to activate and to hide modem on the bios. I tried to stop > > > > > > > machine, take off battery, wait 10s, put battery again, and boot > > > > > > > without the power cable connected... and i tried lots of things from > > > > > > > ubuntuforums. I reinstalled feisty and sound doesn't work. > > > > > > > > > > > > > > I used alsa-info.sh script, here is the result: > > > > > > > > > > > > > > http://pastebin.ca/610317 > > > > > > > > > > > > The codec isn't handled via the proper support code but only by the > > > > > > generic parser. It won't work for Thinkpad. > > > > > > > > > > > > > > > > I'm not sure if i understood... then, no solution for me now? > > > > > > > > > > should i try the alsa svn code? > > > > > > > > > > > > > > > > > Should the new kernel 2.6.22 help me? > > > > > > > > > > > > X60 is known to work with recent kernels (but you'd better to give > > > > > > probe_mask=1 option to avoid the modem codec). > > > > > > > > > > > > > > > > I tried, rebooted and pastebin changed: > > > > > http://pastebin.ca/610387 > > > > > > > > > > This doesn't exist now: > > > > > # Codec: Conexant ID 2bfa > > > > > # Address: 1 > > > > > # Vendor Id: 0x14f12bfa > > > > > # Subsystem Id: 0x17aa201b > > > > > # Revision Id: 0x90000 > > > > > > > > Err, it's a modem codec. Pass probe_mask=2 instead, then. > > > > > > > > > > Now i have still no sound. But there's no messages about hda on dmesg > > > > > > $ dmesg | grep -i hda > > > > > > $ tail -2 /etc/modprobe.d/alsa-base > > > options snd-hda-intel probe_mask=2 > > > > > > I commented the /etc/modprobe.d/snd-hda-intel.modprobe > > > > > > On pastebin: > > > http://pastebin.ca/610431 > > > > > > The "HDA-Intel Codec information" changed a lot. > > > > > > Still any ideas? > > > > It's really from 2.6.22 kernel? I won't debug 2.6.20 kernel drivers > > unless you build ALSA 1.0.14 driver from tarball separately. > > > > Once after upgrading 2.6.22 kernel, try at first without any module > > options for snd-hda-intel. Check /proc/asound/card0/codec#* file (if > > any) whether it recogizes AD1981 codec. If not, play with probe_mask > > option. Once after the module gets loaded, then make sure that you > > unmuted / adjusted the mixer volumes. Use aplay or speaker-test for > > testing. Finally, if it still doesn't work, report again. > > > > > No, it's this kernel: > $ uname -a > Linux corall 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux > > I asked about upgrading to 2.6.22, but i'm still on 2.6.20 > > But i built alsa 1.0.14 separately Then it should work definitely... at least on Thinkpad X60. > My asound/card... is: > > $ cat /proc/asound/card0/codec#* > Codec: Conexant ID 2bfa > Address: 1 > Vendor Id: 0x14f12bfa > Subsystem Id: 0x17aa201b > Revision Id: 0x90000 > > If you can help me now, i will be glad, if not, i will try to upload > to 2.6.22 as soon as possible. Thanks Remove all module options for snd-hda-intel. That's the first step. After loading the module, see the file /sys/modules/snd_hda_intel/parameters/probe_mask. This value should be -1 (not 1 or 2). Honestly, this is a kind of topic that is handled on alsa-users ML... Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
