2007/7/9, Takashi Iwai <tiwai@xxxxxxx>: > At Mon, 9 Jul 2007 15:26:59 +0200, > Xavi de Blas wrote: > > > > Hello > > > > 2007/7/9, Takashi Iwai <tiwai@xxxxxxx>: > > > At Mon, 9 Jul 2007 14:16:43 +0200, > > > Xavi de Blas wrote: > > > > > > > > Hello, I installed Wine on my Ubuntu Feisty on IBM-lenovo X60s, and > > > > after reboot, sound never worked again. > > > > > > > > I tried to activate and to hide modem on the bios. I tried to stop > > > > machine, take off battery, wait 10s, put battery again, and boot > > > > without the power cable connected... and i tried lots of things from > > > > ubuntuforums. I reinstalled feisty and sound doesn't work. > > > > > > > > I used alsa-info.sh script, here is the result: > > > > > > > > http://pastebin.ca/610317 > > > > > > The codec isn't handled via the proper support code but only by the > > > generic parser. It won't work for Thinkpad. > > > > > > > I'm not sure if i understood... then, no solution for me now? > > > > should i try the alsa svn code? > > > > > > > > Should the new kernel 2.6.22 help me? > > > > > > X60 is known to work with recent kernels (but you'd better to give > > > probe_mask=1 option to avoid the modem codec). > > > > > > > I tried, rebooted and pastebin changed: > > http://pastebin.ca/610387 > > > > This doesn't exist now: > > # Codec: Conexant ID 2bfa > > # Address: 1 > > # Vendor Id: 0x14f12bfa > > # Subsystem Id: 0x17aa201b > > # Revision Id: 0x90000 > > Err, it's a modem codec. Pass probe_mask=2 instead, then. > Now i have still no sound. But there's no messages about hda on dmesg $ dmesg | grep -i hda $ tail -2 /etc/modprobe.d/alsa-base options snd-hda-intel probe_mask=2 I commented the /etc/modprobe.d/snd-hda-intel.modprobe On pastebin: http://pastebin.ca/610431 The "HDA-Intel Codec information" changed a lot. Still any ideas? Thanks again > > > But still no sound. > > > > I have this at the end of /etc/modprobe.d/alsa-base > > > > options snd-hda-intel probe_mask=1 single_cmd=1 model=laptop-eapd > > > > I have also a /etc/modprobe.d/snd-hda-intel.modprobe > > with this: > > options snd-hda-intel probe_mask=1 index=0 single_cmd=1 model=laptop-eapd > > Don't add any options except for probe_mask. > (Even you don't need probe_mask option for most cases.) > > > Takashi > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
