Paul Kavan wrote: > > > Perhaps it would be useful to see a diagram of the connections between > the SSC and codec on your board, including directions. > > > Attached is a quick diagram. As far as the wiring, they only connect > where you see a node connection....did not have a real circuit program > handy. Let me know if you have questions on the diagram. I tried to make > it as clear as possible. > > I have the bitclocks and codec master clock tied together. Also, I have > the frames tied together. The diagram is clear except for the signal directions. I assume that all signals are outputs from SSC to codec except for RD0 - PCMT. Could you please provide the settings that you are currently working with? In particular, I would like to see how RFMR.FSOS is set. If TF0 is outputting the frame sync and tied to RF0, then you probably want RF0 configured as an input (RFMR.FSOS = None). And if RF0 and RK0 are receiving signals on their GPIO lines, you do need to initialize the GPIO registers in your machine driver. ../fam -- Frank Mandarino fmandarino(a)endrelia.com Endrelia Technologies Inc. Toronto, Ontario, Canada _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
