Takashi Iwai wrote: > At Tue, 12 Jun 2007 23:49:23 -0700, > Eran Guendelman wrote: >>> So, we need to add a new model. Could you give the output of "lspci >>> -nv", too? We need PCI SSID to identify the device. Then I can write >>> a patch to try. >> 00:1b.0 Class 0403: 8086:27d8 (rev 01) >> Subsystem: 1028:01d7 >> Flags: bus master, fast devsel, latency 0, IRQ 233 >> Memory at efffc000 (64-bit, non-prefetchable) [size=16K] >> Capabilities: [50] Power Management version 2 >> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ >> Queue=0/0 Enable- >> Capabilities: [70] Express Unknown type IRQ 0 >> Capabilities: [100] Virtual Channel >> Capabilities: [130] Unknown (5) > > OK, looks fine. Did you try my patch? Sorry for the delayed reply... Yup, just tried it out and it works. Thanks. >>>> - Does the snd_hda_intel driver currently (or will it eventually) >>>> support dynamic switching so I can switch from the Mic In to Line In or >>>> to Rear Speakers Out, etc, just like in the Windows driver? >>> Hm? It should have already the switches, "Line In As Output" and "Mic >>> As Output"... >> I did see those when I tried the 3stack mode, but in my current fix >> (modifying "ref" with my pin configs) I don't get such options in the >> mixer. Any idea what I would need to do to get it to add these switches >> to the mixer? This is the output from "amixer controls" >> >> numid=8,iface=MIXER,name='Master Playback Switch' >> numid=7,iface=MIXER,name='Master Playback Volume' >> numid=13,iface=MIXER,name='PCM Playback Volume' >> numid=6,iface=MIXER,name='Front Playback Switch' >> numid=5,iface=MIXER,name='Front Playback Volume' >> numid=3,iface=MIXER,name='Capture Switch' >> numid=2,iface=MIXER,name='Capture Volume' >> numid=9,iface=MIXER,name='IEC958 Playback Con Mask' >> numid=10,iface=MIXER,name='IEC958 Playback Pro Mask' >> numid=11,iface=MIXER,name='IEC958 Playback Default' >> numid=12,iface=MIXER,name='IEC958 Playback Switch' >> numid=14,iface=MIXER,name='Digital Capture Volume' >> numid=1,iface=MIXER,name='Input Source' >> numid=4,iface=MIXER,name='Mux Capture Volume' > > Could you show the kernel message regarding pin detections (appearing > only when debug options is set)? > The mic/line-in output switches appear only when > - line_outs are less than 3 (usually 1) > - line and mic (not fmic or fline) inputs are found > Well, maybe the problem is that it detects an fmic and not a mic. This is because all I did was take the pin configs from the Windows INI (which originally made 0x0c be a Line In at Ext Front), and changed it from a Line In to a Mic, making it a Mic at Ext Front... I'm assuming this makes it an fmic instead of a mic... I don't really understand what the big diff between front and non-front is, but the jacks on the laptop are certainly on the front of the laptop if it's at all related to that... Actually, even if I made it a non-front mic, it will fail to find a Line In anyway because I've effectively replaced it by a Mic, no? So the test for having mic/line-in output switches will fail... Anyway, here's the debug output when loading the driver: ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:1810: hda_codec: model 'dell' is selected ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0a pin config 0221121e ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0b pin config 408103ff ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0c pin config 02a1123e ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0d pin config 90100310 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0e pin config 408003f1 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0f pin config 0221122f ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 10 pin config 03451340 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 11 pin config 40c003f2 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 15 pin config 50a003f3 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 1b pin config 405003f4 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:2339: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:2343: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:2347: hp_outs=2 (0xa/0xf/0x0/0x0/0x0) ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:2355: inputs: mic=0x0, fmic=0xc, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:1153: stac92xx_add_dyn_out_pins: total dac count=4 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:1264: dac_nids=1 (0x2/0x0/0x0/0x0/0x0) _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
