> So, we need to add a new model. Could you give the output of "lspci
> -nv", too? We need PCI SSID to identify the device. Then I can write
> a patch to try.
00:1b.0 Class 0403: 8086:27d8 (rev 01)
Subsystem: 1028:01d7
Flags: bus master, fast devsel, latency 0, IRQ 233
Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)
>> - Does the snd_hda_intel driver currently (or will it eventually)
>> support dynamic switching so I can switch from the Mic In to Line In or
>> to Rear Speakers Out, etc, just like in the Windows driver?
>
> Hm? It should have already the switches, "Line In As Output" and "Mic
> As Output"...
I did see those when I tried the 3stack mode, but in my current fix
(modifying "ref" with my pin configs) I don't get such options in the
mixer. Any idea what I would need to do to get it to add these switches
to the mixer? This is the output from "amixer controls"
numid=8,iface=MIXER,name='Master Playback Switch'
numid=7,iface=MIXER,name='Master Playback Volume'
numid=13,iface=MIXER,name='PCM Playback Volume'
numid=6,iface=MIXER,name='Front Playback Switch'
numid=5,iface=MIXER,name='Front Playback Volume'
numid=3,iface=MIXER,name='Capture Switch'
numid=2,iface=MIXER,name='Capture Volume'
numid=9,iface=MIXER,name='IEC958 Playback Con Mask'
numid=10,iface=MIXER,name='IEC958 Playback Pro Mask'
numid=11,iface=MIXER,name='IEC958 Playback Default'
numid=12,iface=MIXER,name='IEC958 Playback Switch'
numid=14,iface=MIXER,name='Digital Capture Volume'
numid=1,iface=MIXER,name='Input Source'
numid=4,iface=MIXER,name='Mux Capture Volume'
Thanks.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
