A NOTE has been added to this issue. ====================================================================== <https://bugtrack.alsa-project.org/alsa-bug/view.php?id=324> ====================================================================== Reported By: garden Assigned To: pzad ====================================================================== Project: ALSA - driver Issue ID: 324 Category: PCI - emu10k1 Reproducibility: always Severity: major Priority: normal Status: assigned Distribution: Debian sid Kernel Version: 2.6.5 ====================================================================== Date Submitted: 06-06-2004 13:17 CEST Last Modified: 06-19-2006 16:33 CEST ====================================================================== Summary: Audigy2 Platinum: very low volume (both in and out) Description: Both the input and output levels of my Audigy2 Platinum seem to be very low if compared to the same card with Windows (win98se). For example, I connected an external source (a MD player with very loud music in the disc) to the optical input, then to the aux input, then to the aux2 input. With the mixer settings to 100% the input level still does not go over 20-25% of the maximum amplitude (while with Windows I have to lower the input level or it will be too high). The same thing applies to the output level of my analog speakers. [I must be *very* careful when I reboot with Windows and must not forget to turn the volume knob from 10 to 2]. I had exactly the same problem when I used the emu10k1 drivers from sourceforge. ====================================================================== ---------------------------------------------------------------------- pzad - 01-26-06 22:03 ---------------------------------------------------------------------- For now keep this bug open. Recording from "mic in" is lower (compared to windows). I will post patch (capture gain on AC97 needs to be set to 3-6 dB). Recording from PCM is OK - when all volumes set 100% if you record PCM you will get same recording volume as it was played. I need to check recording from "line in" and playback part. ---------------------------------------------------------------------- killrbuckeye - 06-19-06 16:33 ---------------------------------------------------------------------- pzad made me aware of this issue after I reported the problem in the Creative forum. I have the same symptoms as garden: very low capture volumes with the Line-level inputs Aux2 (stereo RCA) and Line2 (1/4"), even with all the ALSA capture volumes set to 100%. I can make the signals clip in Windows, so I know my source levels are more than adequate. Issue History Date Modified Username Field Change ====================================================================== 06-06-04 13:17 garden New Issue 06-06-04 13:17 garden Distribution => Debian sid 06-06-04 13:17 garden Kernel Version => 2.6.5 06-28-04 09:17 pzad Status new => assigned 06-28-04 09:17 pzad Assigned To => pzad 09-14-04 15:24 garden Note Added: 0001758 09-16-04 10:16 pzad Note Added: 0001766 09-16-04 11:32 garden File Added: amixer.out 09-16-04 11:37 garden Note Added: 0001769 09-16-04 12:17 pzad Note Added: 0001772 09-16-04 13:23 garden Note Added: 0001773 08-30-05 12:23 jdthood Note Added: 0005975 08-30-05 12:32 garden Note Added: 0005978 08-30-05 20:21 rlrevell Note Added: 0005981 08-31-05 14:01 pzad Note Added: 0005988 08-31-05 18:54 rlrevell Note Added: 0005990 01-26-06 21:52 pzad Note Added: 0007789 01-26-06 21:55 rlrevell Note Added: 0007790 01-26-06 22:03 pzad Note Added: 0007791 01-28-06 23:11 andred Issue Monitored: andred 06-19-06 16:33 killrbuckeye Note Added: 0010316 ====================================================================== _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel
