Hi, Aditya
Sorry for the late reply.
And thank you for improving the patchset. This looks better and test
is ok for my side, so: Ack.
Thanks
Lianbo
On 3/4/24 17:59, Aditya Gupta wrote:
The Problem:
============
Currently crash is unable to show function arguments and local variables, as
gdb can do. And functionality for moving between frames ('up'/'down') is not
working in crash.
Crash has 'gdb passthroughs' for things gdb can do, but the gdb passthroughs
'bt', 'frame', 'info locals', 'up', 'down' are not working either, due to
gdb not getting the register values from `crash_target::fetch_registers`,
which then uses `machdep->get_cpu_reg`, which is not implemented for PPC64
Proposed Solution:
==================
Fix the gdb passthroughs by implementing "machdep->get_cpu_reg" for PPC64.
This way, "gdb mode in crash" will support this feature for both ELF and
kdump-compressed vmcore formats, while "gdb" would only have supported ELF
format
This way other features of 'gdb', such as seeing
backtraces/registers/variables/arguments/local variables, moving up and
down stack frames, can be used with any ppc64 vmcore, irrespective of
being ELF format or kdump-compressed format.
Note: This doesn't support live debugging on ppc64, since registers are not
available to be read
Implications on Architectures:
====================================
No architecture other than PPC64 has been affected, other than in case of
'frame' command
As mentioned in patch #2, since frame will not be prohibited, so it will print:
crash> frame
#0 <unavailable> in ?? ()
Instead of before prohibited message:
crash> frame
crash: prohibited gdb command: frame
Major change will be in 'gdb mode' on PPC64, that it will print the frames, and
local variables, instead of failing with errors showing no frame, or showing
that couldn't get PC, it will be able to give all this information.
Testing:
========
Git tree with this patch series applied:
https://github.com/adi-g15-ibm/crash/tree/stack-unwind-v10
To test various gdb passthroughs:
(crash) set
(crash) set gdb on
gdb> thread
gdb> bt
gdb> info threads
gdb> info threads
gdb> info locals
gdb> info variables irq_rover_lock
gdb> info args
gdb> thread 2
gdb> set gdb off
(crash) set
(crash) set -c 6
(crash) gdb thread
(crash) bt
(crash) gdb bt
(crash) frame
(crash) gdb up
(crash) gdb down
(crash) info locals
Known Issues:
=============
1. In gdb mode, 'bt' might fail to show backtrace in few vmcores collected
from older kernels. This is a known issue due to register mismatch, and
its fix has been merged upstream:
This can also cause some 'invalid kernel virtual address' errors during gdb
unwinding the stack registers
Commit: https://github.com/torvalds/linux/commit/b684c09f09e7a6af3794d4233ef785819e72db79
Fixing GDB passthroughs on other architectures
==============================================
Much of the work for making gdb passthroughs like 'gdb bt', 'gdb
thread', 'gdb info locals' etc. has been done by the patches introducing
'machdep->get_cpu_reg' and this series fixing some issues in that.
Other architectures should be able to fix these gdb functionalities by
simply implementing 'machdep->get_cpu_reg (cpu, regno, ...)'.
The reasoning behind that has been explained with a diagram in commit
description of patch #1
I will assist with my findings/observations fixing it on ppc64 whenever needed.
Changelog:
==========
V10:
+ introduce 'bt_info.need_free' to prevent memory leak in get_cpu_reg
V9:
+ minor change in patch #5: sync gdb context on a 'set' and 'set -p'
+ add taoliu's patch for using current context, and fixes in ppc64_get_cpu_reg
V8:
+ use get_active_task instead of depending on CURRENT_CONTEXT in ppc64_get_cpu_reg
+ rebase to upstream/master (5977936c0a91)
V7:
+ move changes in gdb-10.2.patch to the end (minor change in patch #3,4,5)
+ fix a memory leak in ppc64_get_cpu_reg (minor change in patch #1)
+ use ascii diagram in patch #1 description
V6:
+ changes in patch #5: fix bug introduced in v5 that caused initial gdb thread
to be thread 1
V5:
+ changes in patch #1: made ppc64_get_cpu_reg static, and remove unreachable
code
+ changes in patch #3: fixed typo 'ppc64_renum' instead of 'ppc64_regnum',
remove unneeded if condition
+ changes in patch #5: implement refresh regcache on per thread, instead of all
threads at once
V4:
+ fix segmentation fault in live debugging (change in patch #1)
+ mention live debugging not supported in cover letter and patch #1
+ fixed some checkpatch warnings (change in patch #5)
V3:
+ default gdb thread will be the crashing thread, instead of being
thread '0'
+ synchronise crash cpu and gdb thread context
+ fix bug in gdb_interface, that replaced gdb's output stream, losing
output in some cases, such as info threads and extra output in info
variables
+ fix 'info threads'
RFC V2:
- removed patch implementing 'frame', 'up', 'down' in crash
- updated the cover letter by removing the mention of those commands other
than the respective gdb passthrough
Aditya Gupta (5):
ppc64: correct gdb passthroughs by implementing machdep->get_cpu_reg
remove 'frame' from prohibited commands list
synchronise cpu context changes between crash/gdb
fix gdb_interface: restore gdb's output streams at end of
gdb_interface
fix 'info threads' command
crash_target.c | 57 ++++++++++++++++++++
defs.h | 131 ++++++++++++++++++++++++++++++++++++++++++++-
gdb-10.2.patch | 137 ++++++++++++++++++++++++++++++++++++++++++++++++
gdb_interface.c | 2 +-
kernel.c | 49 +++++++++++++++--
ppc64.c | 131 ++++++++++++++++++++++++++++++++++++++++++---
task.c | 32 ++++++++---
tools.c | 10 ++--
8 files changed, 522 insertions(+), 27 deletions(-)
--
Crash-utility mailing list -- devel@xxxxxxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to devel-leave@xxxxxxxxxxxxxxxxxxxxxxxxxxx
https://${domain_name}/admin/lists/devel.lists.crash-utility.osci.io/
Contribution Guidelines: https://github.com/crash-utility/crash/wiki
