[Crash-utility] [PATCH v6 0/5] Improve stack unwind on ppc64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Problem:
============

Currently crash is unable to show function arguments and local variables, as
gdb can do. And functionality for moving between frames ('up'/'down') is not
working in crash.

Crash has 'gdb passthroughs' for things gdb can do, but the gdb passthroughs
'bt', 'frame', 'info locals', 'up', 'down' are not working either, due to
gdb not getting the register values from `crash_target::fetch_registers`,
which then uses `machdep->get_cpu_reg`, which is not implemented for PPC64

Proposed Solution:
==================

Fix the gdb passthroughs by implementing "machdep->get_cpu_reg" for PPC64.
This way, "gdb mode in crash" will support this feature for both ELF and
kdump-compressed vmcore formats, while "gdb" would only have supported ELF
format

This way other features of 'gdb', such as seeing
backtraces/registers/variables/arguments/local variables, moving up and
down stack frames, can be used with any ppc64 vmcore, irrespective of
being ELF format or kdump-compressed format.

Note: This doesn't support live debugging on ppc64, since registers are not
available to be read

Implications on Architectures:
====================================

No architecture other than PPC64 has been affected, other than in case of
'frame' command

As mentioned in patch #2, since frame will not be prohibited, so it will print:

	crash> frame
	#0  <unavailable> in ?? ()

Instead of before prohibited message:

	crash> frame
	crash: prohibited gdb command: frame

Major change will be in 'gdb mode' on PPC64, that it will print the frames, and
local variables, instead of failing with errors showing no frame, or showing
that couldn't get PC, it will be able to give all this information.

Testing:
========

Git tree with this patch series applied:
https://github.com/adi-g15-ibm/crash/tree/stack-unwind-v6

To test various gdb passthroughs:

	(crash) set
	(crash) set gdb on
	gdb> thread
	gdb> bt
	gdb> info threads
	gdb> info threads
	gdb> info locals
	gdb> info variables irq_rover_lock
	gdb> info args
	gdb> thread 2
	gdb> set gdb off
	(crash) set
	(crash) set -c 6
	(crash) gdb thread
	(crash) bt
	(crash) gdb bt
	(crash) frame
	(crash) up
	(crash) down
	(crash) info locals

Known Issues:
=============

1. In gdb mode, 'bt' might fail to show backtrace in few vmcores collected
   from older kernels. This is a known issue due to register mismatch, and
   its fix has been merged upstream:

   This can also cause some 'invalid kernel virtual address' errors during gdb
   unwinding the stack registers

Commit: https://github.com/torvalds/linux/commit/b684c09f09e7a6af3794d4233ef785819e72db79

Fixing GDB passthroughs on other architectures
==============================================

Much of the work for making gdb passthroughs like 'gdb bt', 'gdb
thread', 'gdb info locals' etc. has been done by the patches introducing
'machdep->get_cpu_reg' and this series fixing some issues in that.

Other architectures should be able to fix these gdb functionalities by
simply implementing 'machdep->get_cpu_reg (cpu, regno, ...)'.

The reasoning behind that has been explained with a diagram in commit
description of patch #1

I will assist with my findings/observations fixing it on ppc64 whenever needed.

Changelog:
==========

V6:
+ changes in patch #5: fix bug introduced in v5 that caused initial gdb thread
  to be thread 1

V5:
+ changes in patch #1: made ppc64_get_cpu_reg static, and remove unreachable
  code
+ changes in patch #3: fixed typo 'ppc64_renum' instead of 'ppc64_regnum',
  remove unneeded if condition
+ changes in patch #5: implement refresh regcache on per thread, instead of all
  threads at once

V4:
+ fix segmentation fault in live debugging (change in patch #1)
+ mention live debugging not supported in cover letter and patch #1
+ fixed some checkpatch warnings (change in patch #5)

V3:
+ default gdb thread will be the crashing thread, instead of being
  thread '0'
+ synchronise crash cpu and gdb thread context
+ fix bug in gdb_interface, that replaced gdb's output stream, losing
  output in some cases, such as info threads and extra output in info
  variables
+ fix 'info threads'

RFC V2:
  - removed patch implementing 'frame', 'up', 'down' in crash
  - updated the cover letter by removing the mention of those commands other
	than the respective gdb passthrough

Aditya Gupta (5):
  ppc64: correct gdb passthroughs by implementing machdep->get_cpu_reg
  remove 'frame' from prohibited commands list
  synchronise cpu context changes between crash/gdb
  fix gdb_interface: restore gdb's output streams at end of
    gdb_interface
  fix 'info threads' command

 crash_target.c  |  44 ++++++++++++++++
 defs.h          | 130 +++++++++++++++++++++++++++++++++++++++++++++++-
 gdb-10.2.patch  | 110 +++++++++++++++++++++++++++++++++++++++-
 gdb_interface.c |   2 +-
 kernel.c        |  47 +++++++++++++++--
 ppc64.c         |  95 +++++++++++++++++++++++++++++++++--
 task.c          |  14 ++++++
 tools.c         |   2 +-
 8 files changed, 434 insertions(+), 10 deletions(-)

-- 
2.41.0
--
Crash-utility mailing list -- devel@xxxxxxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to devel-leave@xxxxxxxxxxxxxxxxxxxxxxxxxxx
https://${domain_name}/admin/lists/devel.lists.crash-utility.osci.io/
Contribution Guidelines: https://github.com/crash-utility/crash/wiki




[Index of Archives]     [Fedora Development]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [KDE Users]     [Fedora Tools]

 

Powered by Linux