在 2025/2/14 17:51, Jerome Brunet 写道:
[ EXTERNAL EMAIL ]
On Fri 14 Feb 2025 at 10:13, jiebing chen via B4 Relay <devnull+jiebing.chen.amlogic.com@xxxxxxxxxx> wrote:
From: jiebing chen <jiebing.chen@xxxxxxxxxxx>
Add the audio tocodec for s4, add the 8 lane support,
add the mclk and sclk enable event when start data enable auto switch
Again, incomplete description and mixing things together.
Signed-off-by: jiebing chen <jiebing.chen@xxxxxxxxxxx>
---
sound/soc/meson/axg-card.c | 3 +-
sound/soc/meson/g12a-toacodec.c | 64 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c
index a2dfccb7990f3a53f508fc6724b21de53b4494d8..5cef069c3370257d4aaf24d7270482651babcfe1 100644
--- a/sound/soc/meson/axg-card.c
+++ b/sound/soc/meson/axg-card.c
@@ -303,7 +303,8 @@ static int axg_card_cpu_is_tdm_iface(struct device_node *np)
static int axg_card_cpu_is_codec(struct device_node *np)
{
return of_device_is_compatible(np, DT_PREFIX "g12a-tohdmitx") ||
- of_device_is_compatible(np, DT_PREFIX "g12a-toacodec");
+ of_device_is_compatible(np, DT_PREFIX "g12a-toacodec") ||
+ of_device_is_compatible(np, DT_PREFIX "s4-toacodec");
There is no need to extend that indefinitely, use fall-back
}
static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
diff --git a/sound/soc/meson/g12a-toacodec.c b/sound/soc/meson/g12a-toacodec.c
index 531bb8707a3ec4c47814d6a0676d5c62c705da75..a93a91136e8ea00e856c3981b9c1e7e08d927a3b 100644
--- a/sound/soc/meson/g12a-toacodec.c
+++ b/sound/soc/meson/g12a-toacodec.c
@@ -41,6 +41,9 @@
#define CTRL0_BCLK_SEL_LSB 4
#define CTRL0_MCLK_SEL GENMASK(2, 0)
+#define CTRL0_BCLK_ENABLE_SHIFT 30
+#define CTRL0_MCLK_ENABLE_SHIFT 29
+
#define TOACODEC_OUT_CHMAX 2
struct g12a_toacodec {
@@ -107,6 +110,33 @@ static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
return 1;
}
+static int tocodec_clk_enable(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *control,
+ int event)
+{
+ int ret = 0;
+ unsigned int mask = 0, val = 0;
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+
Over complicated for no reason
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ mask = 1 << CTRL0_MCLK_ENABLE_SHIFT | 1 << CTRL0_BCLK_ENABLE_SHIFT;
+ val = 1 << CTRL0_MCLK_ENABLE_SHIFT | 1 << CTRL0_BCLK_ENABLE_SHIFT;
+ ret = snd_soc_component_update_bits(component, TOACODEC_CTRL0, mask, val);
All this could be done in one line and be actually readable if you
properly used the BIT() macro.
+ break;
+ case SND_SOC_DAPM_PRE_PMD:
+ mask = 1 << CTRL0_MCLK_ENABLE_SHIFT | 1 << CTRL0_BCLK_ENABLE_SHIFT;
+ val = 0 << CTRL0_MCLK_ENABLE_SHIFT | 0 << CTRL0_BCLK_ENABLE_SHIFT;
+ ret = snd_soc_component_update_bits(component, TOACODEC_CTRL0, mask, val);
+ break;
+ default:
+ dev_err(component->dev, "Unexpected event %d\n", event);
+ return -EINVAL;
+ }
... and nothing explains what is being done and why ...
+
+ return ret;
+}
+
static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0,
CTRL0_DAT_SEL_LSB,
g12a_toacodec_mux_texts);
@@ -143,6 +173,14 @@ static const struct snd_soc_dapm_widget sm1_toacodec_widgets[] = {
&g12a_toacodec_out_enable),
};
+static const struct snd_soc_dapm_widget s4_toacodec_widgets[] = {
+ SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
+ &sm1_toacodec_mux),
+ SND_SOC_DAPM_SWITCH_E("OUT EN", SND_SOC_NOPM, 0, 0,
+ &g12a_toacodec_out_enable, tocodec_clk_enable,
+ (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD)),
Drops the .autodisable without a even comment
AFAICT, could be done like the other SoC with SOC_SINGLE_AUTODISABLE()
with properly chosen values.
you mean we can add the New switch for auto enable tocodec mclk bit[29]
and tocodec bclk bit[30]
static const struct snd_kcontrol_new s4_toacodec_mclk_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", TOACODEC_CTRL0,
CTRL0_ENABLE_BCLK_SHIFT, 1, 0);
static const struct snd_kcontrol_new s4_toacodec_bclk_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", TOACODEC_CTRL0,
CTRL0_ENABLE_MCLK_SHIFT, 1, 0);
add the route path
static const struct snd_soc_dapm_widget s4_toacodec_widgets[] = {
SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
&sm1_toacodec_mux),
SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0,
&g12a_toacodec_out_enable),
SND_SOC_DAPM_SWITCH("MCLK OUT EN", SND_SOC_NOPM, 0, 0,
&s4_toacodec_mclk_enable),
SND_SOC_DAPM_SWITCH("BCLK OUT EN", SND_SOC_NOPM, 0, 0,
&s4_toacodec_mclk_enable),
};
static const struct snd_soc_dapm_route s4_toacodec_routes[] = {
{ "SRC", "I2S A", "IN A Playback" },
{ "SRC", "I2S B", "IN B Playback" },
{ "SRC", "I2S C", "IN C Playback" },
{ "OUT EN", "Switch", "SRC" },
{"MCLK OUT EN", "Switch","OUT EN"},
{"BCLK OUT EN", "Switch","MCLK OUT EN"},
{ "OUT Capture", NULL, "BCLK OUT EN" },
};
add it replace auto switch event, like it ?
+};
+
static int g12a_toacodec_input_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
@@ -236,6 +274,10 @@ static const struct snd_kcontrol_new sm1_toacodec_controls[] = {
SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 3, 0),
};
+static const struct snd_kcontrol_new s4_toacodec_controls[] = {
+ SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 7, 0),
+};
+
No. there is no reason to add that for s4 and not for sm1 which has 8
line HW support too. That clearly shows up with #define used.
If you must do that, please do it correctly without leaving the other
platforms behind.
static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
.probe = g12a_toacodec_component_probe,
.controls = g12a_toacodec_controls,
@@ -258,6 +300,17 @@ static const struct snd_soc_component_driver sm1_toacodec_component_drv = {
.endianness = 1,
};
+static const struct snd_soc_component_driver s4_toacodec_component_drv = {
+ .probe = sm1_toacodec_component_probe,
+ .controls = s4_toacodec_controls,
+ .num_controls = ARRAY_SIZE(s4_toacodec_controls),
+ .dapm_widgets = s4_toacodec_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(s4_toacodec_widgets),
+ .dapm_routes = g12a_toacodec_routes,
+ .num_dapm_routes = ARRAY_SIZE(g12a_toacodec_routes),
+ .endianness = 1,
+};
+
static const struct regmap_config g12a_toacodec_regmap_cfg = {
.reg_bits = 32,
.val_bits = 32,
@@ -278,6 +331,13 @@ static const struct g12a_toacodec_match_data sm1_toacodec_match_data = {
.field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 6),
};
+static const struct g12a_toacodec_match_data s4_toacodec_match_data = {
+ .component_drv = &s4_toacodec_component_drv,
+ .field_dat_sel = REG_FIELD(TOACODEC_CTRL0, 19, 20),
+ .field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, 12, 14),
+ .field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 6),
+};
+
static const struct of_device_id g12a_toacodec_of_match[] = {
{
.compatible = "amlogic,g12a-toacodec",
@@ -287,6 +347,10 @@ static const struct of_device_id g12a_toacodec_of_match[] = {
.compatible = "amlogic,sm1-toacodec",
.data = &sm1_toacodec_match_data,
},
+ {
+ .compatible = "amlogic,s4-toacodec",
+ .data = &s4_toacodec_match_data,
+ },
{}
};
MODULE_DEVICE_TABLE(of, g12a_toacodec_of_match);
--
Jerome
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]
