Re: [PATCH v2 4/5] ASoC: meson: s4:support audio tocodec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Fri 14 Feb 2025 at 10:13, jiebing chen via B4 Relay <devnull+jiebing.chen.amlogic.com@xxxxxxxxxx> wrote:

> From: jiebing chen <jiebing.chen@xxxxxxxxxxx>
>
> Add the audio tocodec for s4, add the 8 lane support,
> add the mclk and sclk enable event when start data enable auto switch

Again, incomplete description and mixing things together.

>
> Signed-off-by: jiebing chen <jiebing.chen@xxxxxxxxxxx>
> ---
>  sound/soc/meson/axg-card.c      |  3 +-
>  sound/soc/meson/g12a-toacodec.c | 64 +++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 66 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c
> index a2dfccb7990f3a53f508fc6724b21de53b4494d8..5cef069c3370257d4aaf24d7270482651babcfe1 100644
> --- a/sound/soc/meson/axg-card.c
> +++ b/sound/soc/meson/axg-card.c
> @@ -303,7 +303,8 @@ static int axg_card_cpu_is_tdm_iface(struct device_node *np)
>  static int axg_card_cpu_is_codec(struct device_node *np)
>  {
>  	return of_device_is_compatible(np, DT_PREFIX "g12a-tohdmitx") ||
> -		of_device_is_compatible(np, DT_PREFIX "g12a-toacodec");
> +		of_device_is_compatible(np, DT_PREFIX "g12a-toacodec") ||
> +		of_device_is_compatible(np, DT_PREFIX "s4-toacodec");

There is no need to extend that indefinitely, use fall-back

>  }
>  
>  static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
> diff --git a/sound/soc/meson/g12a-toacodec.c b/sound/soc/meson/g12a-toacodec.c
> index 531bb8707a3ec4c47814d6a0676d5c62c705da75..a93a91136e8ea00e856c3981b9c1e7e08d927a3b 100644
> --- a/sound/soc/meson/g12a-toacodec.c
> +++ b/sound/soc/meson/g12a-toacodec.c
> @@ -41,6 +41,9 @@
>  #define  CTRL0_BCLK_SEL_LSB		4
>  #define  CTRL0_MCLK_SEL			GENMASK(2, 0)
>  
> +#define CTRL0_BCLK_ENABLE_SHIFT		30
> +#define CTRL0_MCLK_ENABLE_SHIFT		29
> +
>  #define TOACODEC_OUT_CHMAX		2
>  
>  struct g12a_toacodec {
> @@ -107,6 +110,33 @@ static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
>  	return 1;
>  }
>  
> +static int tocodec_clk_enable(struct snd_soc_dapm_widget *w,
> +			      struct snd_kcontrol *control,
> +			      int event)
> +{
> +	int ret = 0;
> +	unsigned int mask = 0, val = 0;
> +	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
> +

Over complicated for no reason

> +	switch (event) {
> +	case SND_SOC_DAPM_PRE_PMU:
> +		mask = 1 << CTRL0_MCLK_ENABLE_SHIFT | 1 << CTRL0_BCLK_ENABLE_SHIFT;
> +		val = 1 << CTRL0_MCLK_ENABLE_SHIFT | 1 << CTRL0_BCLK_ENABLE_SHIFT;
> +		ret = snd_soc_component_update_bits(component, TOACODEC_CTRL0, mask, val);

All this could be done in one line and be actually readable if you
properly used the BIT() macro.

> +		break;
> +	case SND_SOC_DAPM_PRE_PMD:
> +		mask = 1 << CTRL0_MCLK_ENABLE_SHIFT | 1 << CTRL0_BCLK_ENABLE_SHIFT;
> +		val = 0 << CTRL0_MCLK_ENABLE_SHIFT | 0 << CTRL0_BCLK_ENABLE_SHIFT;
> +		ret = snd_soc_component_update_bits(component, TOACODEC_CTRL0, mask, val);
> +		break;
> +	default:
> +		dev_err(component->dev, "Unexpected event %d\n", event);
> +		return -EINVAL;
> +	}

... and nothing explains what is being done and why ...

> +
> +	return ret;
> +}
> +
>  static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0,
>  			    CTRL0_DAT_SEL_LSB,
>  			    g12a_toacodec_mux_texts);
> @@ -143,6 +173,14 @@ static const struct snd_soc_dapm_widget sm1_toacodec_widgets[] = {
>  			    &g12a_toacodec_out_enable),
>  };
>  
> +static const struct snd_soc_dapm_widget s4_toacodec_widgets[] = {
> +	SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
> +			 &sm1_toacodec_mux),
> +	SND_SOC_DAPM_SWITCH_E("OUT EN", SND_SOC_NOPM, 0, 0,
> +			      &g12a_toacodec_out_enable, tocodec_clk_enable,
> +			      (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD)),

Drops the .autodisable without a even comment 

AFAICT, could be done like the other SoC with SOC_SINGLE_AUTODISABLE()
with properly chosen values.

> +};
> +
>  static int g12a_toacodec_input_hw_params(struct snd_pcm_substream *substream,
>  					 struct snd_pcm_hw_params *params,
>  					 struct snd_soc_dai *dai)
> @@ -236,6 +274,10 @@ static const struct snd_kcontrol_new sm1_toacodec_controls[] = {
>  	SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 3, 0),
>  };
>
> +static const struct snd_kcontrol_new s4_toacodec_controls[] = {
> +	SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 7, 0),
> +};
> +

No. there is no reason to add that for s4 and not for sm1 which has 8
line HW support too. That clearly shows up with #define used.

If you must do that, please do it correctly without leaving the other
platforms behind.

>  static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
>  	.probe			= g12a_toacodec_component_probe,
>  	.controls		= g12a_toacodec_controls,
> @@ -258,6 +300,17 @@ static const struct snd_soc_component_driver sm1_toacodec_component_drv = {
>  	.endianness		= 1,
>  };
>  
> +static const struct snd_soc_component_driver s4_toacodec_component_drv = {
> +	.probe			= sm1_toacodec_component_probe,
> +	.controls		= s4_toacodec_controls,
> +	.num_controls		= ARRAY_SIZE(s4_toacodec_controls),
> +	.dapm_widgets		= s4_toacodec_widgets,
> +	.num_dapm_widgets	= ARRAY_SIZE(s4_toacodec_widgets),
> +	.dapm_routes		= g12a_toacodec_routes,
> +	.num_dapm_routes	= ARRAY_SIZE(g12a_toacodec_routes),
> +	.endianness		= 1,
> +};
> +
>  static const struct regmap_config g12a_toacodec_regmap_cfg = {
>  	.reg_bits	= 32,
>  	.val_bits	= 32,
> @@ -278,6 +331,13 @@ static const struct g12a_toacodec_match_data sm1_toacodec_match_data = {
>  	.field_bclk_sel	= REG_FIELD(TOACODEC_CTRL0, 4, 6),
>  };
>  
> +static const struct g12a_toacodec_match_data s4_toacodec_match_data = {
> +	.component_drv	= &s4_toacodec_component_drv,
> +	.field_dat_sel	= REG_FIELD(TOACODEC_CTRL0, 19, 20),
> +	.field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, 12, 14),
> +	.field_bclk_sel	= REG_FIELD(TOACODEC_CTRL0, 4, 6),
> +};
> +
>  static const struct of_device_id g12a_toacodec_of_match[] = {
>  	{
>  		.compatible = "amlogic,g12a-toacodec",
> @@ -287,6 +347,10 @@ static const struct of_device_id g12a_toacodec_of_match[] = {
>  		.compatible = "amlogic,sm1-toacodec",
>  		.data = &sm1_toacodec_match_data,
>  	},
> +	{
> +		.compatible = "amlogic,s4-toacodec",
> +		.data = &s4_toacodec_match_data,
> +	},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, g12a_toacodec_of_match);

-- 
Jerome




[Index of Archives]     [Pulseaudio]     [Linux Audio Users]     [ALSA Devel]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]

  Powered by Linux