[PATCH v2 0/5] ASoC: sun4i-codec: add headphone dectection for Anbernic RG35XX devices

[Ryan Walklin <ryan@xxxxxxxxxxxxx>]

Hi All, 

V2 of this patch adding support for headphone detection on the Anbernic RG35XX series. No functional changes on this revision, patches refactored to more clearly represent a single change per individual patch, remove vendor prefixing for the device tree binding, improve documentation of the DAPM widget changes and associated UCM, and small whitespace fixes.

Original message below:

This series adds the required device tree bindings to describe GPIOs for jack detection in the sun4i-codec driver, adds support for jack detection to the codec machine driver, and describes the hardware configuration in the RG35XX DTS. The existing speaker amplifier GPIO pin can then be used in concert with jack detection to enable userspace sound servers (via an ALSA UCM configuration) to disable the speaker route when headphones are connected.

Thanks to Chris Morgan for his assistance putting this series together.

Regards,

Ryan

Chris Morgan (4):
  ASoC: dt-bindings: sun4i-a10-codec: add hp-det-gpios
  ASoC: sun4i-codec: correct dapm widgets and controls for h616
  ASoC: sun4i-codec: support hp-det-gpios property
  arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX

Ryan Walklin (1):
  ASoC: sun4i-codec: change h616 card name

 .../sound/allwinner,sun4i-a10-codec.yaml      |  6 ++
 .../sun50i-h700-anbernic-rg35xx-2024.dts      |  5 +-
 sound/soc/sunxi/sun4i-codec.c                 | 59 ++++++++++++++++++-
 3 files changed, 67 insertions(+), 3 deletions(-)

-- 
2.48.1