Hi Claudiu,
On Wed, Nov 13, 2024 at 2:36 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> Add the da7212 audio codec node. Along with it regulators nodes were
> reworked to be able to re-use them on da7212.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
> +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
> @@ -63,7 +63,6 @@ vcc_sdhi0: regulator0 {
> enable-active-high;
> };
>
> -#if SW_CONFIG2 == SW_ON
> vccq_sdhi0: regulator1 {
> compatible = "regulator-gpio";
> regulator-name = "SDHI0 VccQ";
> @@ -73,8 +72,8 @@ vccq_sdhi0: regulator1 {
> gpios-states = <1>;
> states = <3300000 1>, <1800000 0>;
> };
> -#else
> - reg_1p8v: regulator1 {
> +
> + reg_1p8v: regulator2 {
> compatible = "regulator-fixed";
> regulator-name = "fixed-1.8V";
> regulator-min-microvolt = <1800000>;
> @@ -82,9 +81,17 @@ reg_1p8v: regulator1 {
> regulator-boot-on;
> regulator-always-on;
> };
> -#endif
>
> - vcc_sdhi2: regulator2 {
> + reg_3p3v: regulator3 {
> + compatible = "regulator-fixed";
> + regulator-name = "fixed-3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vcc_sdhi2: regulator4 {
So that's why it's better to prefer named over numbered regulators...
> compatible = "regulator-fixed";
> regulator-name = "SDHI2 Vcc";
> regulator-min-microvolt = <3300000>;
LGTM, so
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]