[PATCH] ASoC: cs42l51: Fix some error handling paths in cs42l51_probe()

[Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>]

If devm_gpiod_get_optional() fails, we need to disable previously enabled
regulators, as done in the other error handling path of the function.

Also, gpiod_set_value_cansleep(, 1) needs to be called to undo a
potential gpiod_set_value_cansleep(, 0).
If the "reset" gpio is not defined, this additional call is just a no-op.

This behavior is the same as the one already in the .remove() function.

Fixes: 11b9cd748e31 ("ASoC: cs42l51: add reset management")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
Compile tested only
---
 sound/soc/codecs/cs42l51.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c
index e4827b8c2bde..6e51954bdb1e 100644
--- a/sound/soc/codecs/cs42l51.c
+++ b/sound/soc/codecs/cs42l51.c
@@ -747,8 +747,10 @@ int cs42l51_probe(struct device *dev, struct regmap *regmap)
 
 	cs42l51->reset_gpio = devm_gpiod_get_optional(dev, "reset",
 						      GPIOD_OUT_LOW);
-	if (IS_ERR(cs42l51->reset_gpio))
-		return PTR_ERR(cs42l51->reset_gpio);
+	if (IS_ERR(cs42l51->reset_gpio)) {
+		ret = PTR_ERR(cs42l51->reset_gpio);
+		goto error;
+	}
 
 	if (cs42l51->reset_gpio) {
 		dev_dbg(dev, "Release reset gpio\n");
@@ -780,6 +782,7 @@ int cs42l51_probe(struct device *dev, struct regmap *regmap)
 	return 0;
 
 error:
+	gpiod_set_value_cansleep(cs42l51->reset_gpio, 1);
 	regulator_bulk_disable(ARRAY_SIZE(cs42l51->supplies),
 			       cs42l51->supplies);
 	return ret;
-- 
2.47.0