snd-hda-intel contains lots of CONFIG_PM dependent code although
CONFIG_PM is almost mandatory nowadays, and it makes the code
unnecessarily complex.
Let's reduce the dependencies of CONFIG_PM in snd-hda-intel driver
code. I left a few module options to be dependent on CONFIG_PM (which
are visible to users), but other places are either enabled or
optimized by compiler automatically.
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
---
sound/pci/hda/hda_intel.c | 46 ++++++++++-----------------------
sound/pci/hda/hda_intel_trace.h | 2 --
2 files changed, 14 insertions(+), 34 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 1b550c42db09..31b0c954b0c8 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -186,8 +186,10 @@ MODULE_PARM_DESC(pm_blacklist, "Enable power-management denylist");
static bool power_save_controller = 1;
module_param(power_save_controller, bool, 0644);
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
-#else
+#else /* CONFIG_PM */
#define power_save 0
+#define pm_blacklist false
+#define power_save_controller false
#endif /* CONFIG_PM */
static int align_buffer_size = -1;
@@ -890,7 +892,6 @@ static void __azx_shutdown_chip(struct azx *chip, bool skip_link_reset)
display_power(chip, false);
}
-#ifdef CONFIG_PM
static DEFINE_MUTEX(card_list_lock);
static LIST_HEAD(card_list);
@@ -916,7 +917,7 @@ static void azx_del_card_list(struct azx *chip)
}
/* trigger power-save check at writing parameter */
-static int param_set_xint(const char *val, const struct kernel_param *kp)
+static int __maybe_unused param_set_xint(const char *val, const struct kernel_param *kp)
{
struct hda_intel *hda;
struct azx *chip;
@@ -987,7 +988,6 @@ static void __azx_runtime_resume(struct azx *chip)
display_power(chip, false);
}
-#ifdef CONFIG_PM_SLEEP
static int azx_prepare(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
@@ -1046,7 +1046,7 @@ static int azx_suspend(struct device *dev)
return 0;
}
-static int azx_resume(struct device *dev)
+static int __maybe_unused azx_resume(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
@@ -1097,9 +1097,8 @@ static int azx_thaw_noirq(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM_SLEEP */
-static int azx_runtime_suspend(struct device *dev)
+static int __maybe_unused azx_runtime_suspend(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
@@ -1116,7 +1115,7 @@ static int azx_runtime_suspend(struct device *dev)
return 0;
}
-static int azx_runtime_resume(struct device *dev)
+static int __maybe_unused azx_runtime_resume(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
@@ -1133,7 +1132,7 @@ static int azx_runtime_resume(struct device *dev)
return 0;
}
-static int azx_runtime_idle(struct device *dev)
+static int __maybe_unused azx_runtime_idle(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip;
@@ -1159,23 +1158,14 @@ static int azx_runtime_idle(struct device *dev)
}
static const struct dev_pm_ops azx_pm = {
- SET_SYSTEM_SLEEP_PM_OPS(azx_suspend, azx_resume)
-#ifdef CONFIG_PM_SLEEP
- .prepare = azx_prepare,
- .complete = azx_complete,
- .freeze_noirq = azx_freeze_noirq,
- .thaw_noirq = azx_thaw_noirq,
-#endif
+ SYSTEM_SLEEP_PM_OPS(azx_suspend, azx_resume)
+ .prepare = pm_sleep_ptr(azx_prepare),
+ .complete = pm_sleep_ptr(azx_complete),
+ .freeze_noirq = pm_sleep_ptr(azx_freeze_noirq),
+ .thaw_noirq = pm_sleep_ptr(azx_thaw_noirq),
SET_RUNTIME_PM_OPS(azx_runtime_suspend, azx_runtime_resume, azx_runtime_idle)
};
-#define AZX_PM_OPS &azx_pm
-#else
-#define azx_add_card_list(chip) /* NOP */
-#define azx_del_card_list(chip) /* NOP */
-#define AZX_PM_OPS NULL
-#endif /* CONFIG_PM */
-
static int azx_probe_continue(struct azx *chip);
@@ -2206,7 +2196,6 @@ static int azx_probe(struct pci_dev *pci,
return err;
}
-#ifdef CONFIG_PM
/* On some boards setting power_save to a non 0 value leads to clicking /
* popping sounds when ever we enter/leave powersaving mode. Ideally we would
* figure out how to avoid these sounds, but that is not always feasible.
@@ -2248,13 +2237,11 @@ static const struct snd_pci_quirk power_save_denylist[] = {
SND_PCI_QUIRK(0x1734, 0x1232, "KONTRON SinglePC", 0),
{}
};
-#endif /* CONFIG_PM */
static void set_default_power_save(struct azx *chip)
{
int val = power_save;
-#ifdef CONFIG_PM
if (pm_blacklist) {
const struct snd_pci_quirk *q;
@@ -2265,7 +2252,6 @@ static void set_default_power_save(struct azx *chip)
val = 0;
}
}
-#endif /* CONFIG_PM */
snd_hda_set_power_save(&chip->bus, val * 1000);
}
@@ -2321,10 +2307,6 @@ static int azx_probe_continue(struct azx *chip)
chip->fw->data);
if (err < 0)
goto out_free;
-#ifndef CONFIG_PM
- release_firmware(chip->fw); /* no longer needed */
- chip->fw = NULL;
-#endif
}
#endif
@@ -2765,7 +2747,7 @@ static struct pci_driver azx_driver = {
.remove = azx_remove,
.shutdown = azx_shutdown,
.driver = {
- .pm = AZX_PM_OPS,
+ .pm = &azx_pm,
},
};
diff --git a/sound/pci/hda/hda_intel_trace.h b/sound/pci/hda/hda_intel_trace.h
index 73a7adfa192d..2775fa81a500 100644
--- a/sound/pci/hda/hda_intel_trace.h
+++ b/sound/pci/hda/hda_intel_trace.h
@@ -34,7 +34,6 @@ DEFINE_EVENT(hda_pm, azx_resume,
TP_ARGS(chip)
);
-#ifdef CONFIG_PM
DEFINE_EVENT(hda_pm, azx_runtime_suspend,
TP_PROTO(struct azx *chip),
TP_ARGS(chip)
@@ -44,7 +43,6 @@ DEFINE_EVENT(hda_pm, azx_runtime_resume,
TP_PROTO(struct azx *chip),
TP_ARGS(chip)
);
-#endif
#endif /* _TRACE_HDA_INTEL_H */
--
2.43.0
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]