Re: macvtap with disconnected physical interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 2022-05-03 10:31 Daniel P. Berrangé ha scritto:
Can you share the <interface> configuration for your guest NIC so we
can see how it is setup.

Here we go...

<interface type='direct'>
  <mac address='xx:xx:xx:xx:xx:xx'/>
  <source dev='enp0s31f6' mode='bridge'/>
  <target dev='macvtap0'/>
  <model type='virtio'/>
  <alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</interface>

# ifconfig
Both the physical and macvtap interfaces are disconnected (note how RUNNING is missing):
enp0s31f6: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether xx:xx:xx:xx:xx:xx  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 16  memory 0xf4300000-f4320000
macvtap0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether xx:xx:xx:xx:xx:xx  txqueuelen 500  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

# ip link
2: enp0s31f6: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
    link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
6: macvtap0@enp0s31f6: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 500
    link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff

I can bring up the macvtap interface with the following command (notice the RUNNING/UP flag):
# ip link set macvtap0 protodown off
# ifconfig
macvtap0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::redacted  prefixlen 64  scopeid 0x20<link>
        ether xx:xx:xx:xx:xx:xx  txqueuelen 500  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 42  bytes 6001 (6.0 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
# ip link
6: macvtap0@enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 500
    link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff

However, at the next connection/disconnection of the physical link, the macvtap interface will go down again.

Regards.


--
Danti Gionatan
Supporto Tecnico
Assyoma S.r.l. - www.assyoma.it
email: g.danti@xxxxxxxxxx - info@xxxxxxxxxx
GPG public key ID: FF5F32A8





[Index of Archives]     [Virt Tools]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [KDE Users]

  Powered by Linux